
Welcome to HydrostreamForums.com
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.
Registering only takes a few minutes and you can do so by CLICKING HERE
If you are a member, don't forget to log in to take full advantage of the forum.
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.
Registering only takes a few minutes and you can do so by CLICKING HERE
If you are a member, don't forget to log in to take full advantage of the forum.
IN SEARCH OF A VECTOR.....
-
- Regular
- Posts: 111
- Joined: Feb 19, 2012 12:46 pm
- Location: Culleoka, TN
IN SEARCH OF A VECTOR.....
I am looking for a Vector. I am wanting one that has already been gone through. No motor but rigging would be nice. With or without interior. Really looking for a project with all the glass(hard
) work alreasdy done. I am in TN and would prefer one within 500 miles of here. Thanks everyone. If you have one or know where I can find one send me a message or a text at 931-215-9676.

Alan
'79 Vector Work In Progress
'79 Vector Work In Progress
-
- The new guy
- Posts: 5
- Joined: Feb 19, 2012 1:04 pm
- Location: Eagle River Wisconsin
- Been thanked: 1 time
Re: IN SEARCH OF A VECTOR.....
Hi:
We have a '77 Vector but it has a Merc 150hp on it. We replaced the seat upolstry last year and put in a new hydrolic trim unit and guages in it. All of the work was done by a professional at our local marina.
No fiberglass work has ever been done. The floor and transom seem fine and normal to me. I don't know how to check it there is a problem? Original black carpet.
The red sparkle finish is sun faded and there are a couple of cracks in the windshield. Runs a tad under 60mph. $2800
Thanks
Pickinator (Jim)
(715)477-2298
We have a '77 Vector but it has a Merc 150hp on it. We replaced the seat upolstry last year and put in a new hydrolic trim unit and guages in it. All of the work was done by a professional at our local marina.
No fiberglass work has ever been done. The floor and transom seem fine and normal to me. I don't know how to check it there is a problem? Original black carpet.
The red sparkle finish is sun faded and there are a couple of cracks in the windshield. Runs a tad under 60mph. $2800

Thanks
Pickinator (Jim)
(715)477-2298
-
- Regular
- Posts: 111
- Joined: Feb 19, 2012 12:46 pm
- Location: Culleoka, TN
Re: IN SEARCH OF A VECTOR.....
Would you be willing to seperate and sell just hull and trailer?
Alan
'79 Vector Work In Progress
'79 Vector Work In Progress
-
- HSF Lifetime Supporter
- Posts: 1390
- Joined: Apr 17, 2009 12:41 pm
- Location: New Hampshire
- Has thanked: 4 times
- Been thanked: 20 times
Re: IN SEARCH OF A VECTOR.....
theres a vector on Scream and Fly with the hard work done its listed in the for sale section UNDER 20 foot.........Gregpro50 and its 41800 , but its in NY
-
- Regular
- Posts: 111
- Joined: Feb 19, 2012 12:46 pm
- Location: Culleoka, TN
Re: IN SEARCH OF A VECTOR.....
Been eye balling that one Russ. Did the mapquest on it and it's right at 1000 miles from me. But I like it a lot. Found one in Mobile, Al but can't the guy to send me the pictures on it. But I will find one eventually.
Alan
'79 Vector Work In Progress
'79 Vector Work In Progress
-
- Regular
- Posts: 111
- Joined: Feb 19, 2012 12:46 pm
- Location: Culleoka, TN
-
- Regular
- Posts: 111
- Joined: Feb 19, 2012 12:46 pm
- Location: Culleoka, TN
Re: IN SEARCH OF A VECTOR.....
I found it on CL. It's a little more complete than what I'm looking for but it's a beautiful Vector for sure. By that I mean I'm really looking for just hull and maybe rigging. No interior or anything. They seem to get above my price range if they are all they way complete and I want to kinda have some project aspect left if that makes any sense. But really appreciate the heads up. If you run across any others please let me know. Y'all will know when I find one cause I will load the forum up with questions and photos 

Alan
'79 Vector Work In Progress
'79 Vector Work In Progress
-
- HSF Lifetime Supporter
- Posts: 901
- Joined: Apr 11, 2010 12:57 pm
- Location: beaumont, tx
- Has thanked: 23 times
- Been thanked: 5 times
Re: IN SEARCH OF A VECTOR.....
http://jackson.craigslist.org/boa/2794265827.html
No pics but could be a project
[ Post made via Android ]
No pics but could be a project
[ Post made via Android ]

81 vector....complete restore....1991 7 pedal 200 slightly modded
ALWAYS under construction

HYDROSTREAM HELLIONS
https://www.youtube.com/watch?v=YHE8wWZsFpw
ALWAYS under construction

HYDROSTREAM HELLIONS
https://www.youtube.com/watch?v=YHE8wWZsFpw
-
- Random Topics
- Replies
- Views
- Last post
-
- 4Replies
- 17924 Views
- Last post by Hippie459MN
Jul 20, 2012 5:44 pm
-
- 3Replies
- 5635 Views
- Last post by 77viper
Oct 07, 2009 7:27 pm
-
- 8Replies
- 11425 Views
- Last post by king gill
Oct 07, 2009 10:13 pm
-
- 7Replies
- 7388 Views
- Last post by tommy
Oct 10, 2009 7:47 pm
-
- 12Replies
- 11556 Views
- Last post by shellyisland
Oct 26, 2009 11:27 pm