Welcome to HydrostreamForums.com
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.

Registering only takes a few minutes and you can do so by CLICKING HERE

If you are a member, don't forget to log in to take full advantage of the forum.

HST set up...

Have questions about setting up your boat? Engine height, setback, prop, etc.
Post Reply
User avatar

Topic Author
mattyg1405
Getting my feet wet
Getting my feet wet
Posts: 22
Joined: Jun 18, 2009 10:03 am

HST set up...

Post: # 4893Post mattyg1405 »

hey guys so i finally got my hst floor done , new carpet and seats and ran it last weekend about an hour into it my land and sea hydraulic jackplate gave up on me... but im running a 2.5 efi 260 and i bought a merc 28" chopper just to get me in the water but its a bit marked up so i dont know if i should invest in a new prop or get this one reworked???
what is the difference between a 3 blade and a four blade prop???

i dont know exactly where im at with my prop after the jackplate went out with wayyyyyy too much in the water on gps i still got 86mph out of it before i get way too much lift at about 6500 rpm i have to let off but like i said on gps recall i still hit 86 so i think its gonna turn this 28 just fine when i get the jack plate sqaured away...
Top
Post Reply

  • Random Topics
    Replies
    Views
    Last post

Return to “Props, Setup, and Rigging”