Got the windscreen detail sanding done, black gel and since it was looking good, the sun shield clear top coat was sprayed on.
[ Post made via iPhone ]
Welcome to HydrostreamForums.com
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.
Registering only takes a few minutes and you can do so by CLICKING HERE
If you are a member, don't forget to log in to take full advantage of the forum.
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.
Registering only takes a few minutes and you can do so by CLICKING HERE
If you are a member, don't forget to log in to take full advantage of the forum.
‘89 HST rebuild ( Blown out bottom)
-
alaskastreamin
- Hydrostream know it all
- Posts: 513
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST rebuild ( Blown out bottom)
Black went on just fine.
Got the windscreen detail sanding done, black gel and since it was looking good, the sun shield clear top coat was sprayed on.
[ Post made via iPhone ]
Got the windscreen detail sanding done, black gel and since it was looking good, the sun shield clear top coat was sprayed on.
[ Post made via iPhone ]
- Attachments
-
- 504B9D6A-7DE6-491E-ADED-BC2D6B7E3867.jpeg (342.65 KiB) Viewed 36078 times
-
- 21360EC8-BB00-45D7-A80D-E18386D0DF1F.jpeg (421.32 KiB) Viewed 36078 times
-
- 6B1EFBB1-1FAA-4CA4-9D1E-662300973F86.jpeg (320.44 KiB) Viewed 36078 times
-
- 85CC91DE-501C-464B-B69D-8EBD7CB9787D.jpeg (395.42 KiB) Viewed 36078 times
-
- 99A4A0E5-0869-4809-8143-367C3881CCA0.jpeg (218.98 KiB) Viewed 36078 times
-
- A86A46DE-9D70-4BC3-B6C5-EE58B7E2B1CD.jpeg (240.86 KiB) Viewed 36078 times
-
- CC689AB4-7A3A-470C-9AAC-C21E0BD5B2AA.jpeg (281.41 KiB) Viewed 36078 times
-
- 3E16AF4B-C595-4AD9-B412-E2417B381791.jpeg (224.08 KiB) Viewed 36078 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
alaskastreamin
- Hydrostream know it all
- Posts: 513
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST rebuild ( Blown out bottom)
Dark gray stripe is on. Same routine as the bottom but going in reverse with colors.
[ Post made via iPhone ]
[ Post made via iPhone ]
- Attachments
-
- 3488F60E-C237-4EEA-8378-A6514F4B7FD8.jpeg (228.02 KiB) Viewed 36066 times
-
- A9340F7A-C2A8-47B1-B37B-7E0943547BF1.jpeg (217.7 KiB) Viewed 36066 times
-
- F64F41DC-F6F5-41F9-8490-874392123BEB.jpeg (410.1 KiB) Viewed 36066 times
-
- 198FFDA3-9975-4CB3-8460-41A56484B349.jpeg (451.24 KiB) Viewed 36066 times
-
- 99012BFF-33B1-4C2D-AAE6-384F42BB8B11.jpeg (437.17 KiB) Viewed 36066 times
-
- 5ABD88D2-1F4A-465B-B4BC-2475A76BAA5D.jpeg (383.53 KiB) Viewed 36066 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
alaskastreamin
- Hydrostream know it all
- Posts: 513
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST rebuild ( Blown out bottom)
With the shop at 70*, I was able to get two colors sprayed today. Medium and light gray.
Tomorrow is the red and maybe white.
[ Post made via iPhone ]
Tomorrow is the red and maybe white.
[ Post made via iPhone ]
- Attachments
-
- 689ABC2C-2F05-4133-BED1-60E3663FCF40.jpeg (313.36 KiB) Viewed 36044 times
-
- 3D96D281-AB40-4BDE-B273-780D874BC7A0.jpeg (215.78 KiB) Viewed 36044 times
-
- 2DF4B686-5496-46D2-9370-CCC6971844A7.jpeg (312.32 KiB) Viewed 36044 times
-
- 90823817-6BC3-4D32-8793-AEE9EA20662B.jpeg (418.82 KiB) Viewed 36044 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
alaskastreamin
- Hydrostream know it all
- Posts: 513
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST rebuild ( Blown out bottom)
Got the red AND white on today. Done with colors!!
Wet sand flat and clear tomorrow hopefully.
While waiting for the red to get hard, the windscreen got sanded and polished.
[ Post made via iPhone ]
Wet sand flat and clear tomorrow hopefully.
While waiting for the red to get hard, the windscreen got sanded and polished.
[ Post made via iPhone ]
- Attachments
-
- 18DC229B-D6AD-4F4E-84DF-E04CF5AB0968.jpeg (228.3 KiB) Viewed 36028 times
-
- 4B78B6AE-98A6-44DB-AE60-565E7753718E.jpeg (284.08 KiB) Viewed 36028 times
-
- 8739FD1A-00C2-44E7-A989-B42ED987F3BC.jpeg (227.48 KiB) Viewed 36028 times
-
- 4AC19683-0777-4299-9E32-6017E94FD6D3.jpeg (374.75 KiB) Viewed 36028 times
-
- 4DB592CF-08D8-4F9B-BFC9-5E4F9598B702.jpeg (176.64 KiB) Viewed 36028 times
-
- B974008F-F086-4E2A-AE38-E3F5D552EDEA.jpeg (216.98 KiB) Viewed 36028 times
-
- 87B4FDB3-35EC-4BE9-B2AE-185E019F8AEC.jpeg (336.31 KiB) Viewed 36028 times
-
- CB6F6E5C-7510-4F8B-8B66-4F79F2D817AD.jpeg (392.35 KiB) Viewed 36028 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Re: ‘89 HST rebuild ( Blown out bottom)
This is actualy not a small resto anymore. By the end you completely redid the boat with almost all new gel.
Realy looking forward to see the finished boat. Hopefully it will run very good.
When do you think it will be ready to hit the water?
Realy looking forward to see the finished boat. Hopefully it will run very good.
When do you think it will be ready to hit the water?
-
alaskastreamin
- Hydrostream know it all
- Posts: 513
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST rebuild ( Blown out bottom)
The complete boat got re-gel coated.
What a time sucker this was.
8 hours wet sanding everything flat. Three coats of sun shield clear. Looks like wet candy!!
Taking 2 days off. Heading to Spokane for the weekend. Grabbing the jack plate while there.
[ Post made via iPhone ]
What a time sucker this was.
8 hours wet sanding everything flat. Three coats of sun shield clear. Looks like wet candy!!
Taking 2 days off. Heading to Spokane for the weekend. Grabbing the jack plate while there.
[ Post made via iPhone ]
- Attachments
-
- 55605703-C6A9-4EE2-9C28-4B2523F4F7E3.jpeg (340.68 KiB) Viewed 36007 times
-
- 2BF92A2E-7847-4A7E-B3AF-C4DFDC5A835A.jpeg (350.11 KiB) Viewed 36007 times
-
- AC31AA5D-8027-47CE-8B61-864030733AB2.jpeg (299.21 KiB) Viewed 36007 times
-
- 525BB7B0-77FA-4FF0-BE17-E94BD6F8DCE3.jpeg (254.69 KiB) Viewed 36007 times
-
- DB89EF80-4518-4AE3-85FF-BE4EEFBCFD10.jpeg (307.23 KiB) Viewed 36007 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
dehydrated
- Getting my feet wet
- Posts: 63
- Joined: May 16, 2010 4:24 pm
- Location: eastern washington
- Been thanked: 5 times
Re: ‘89 HST rebuild ( Blown out bottom)
How do you put a price on the build ??? After countless hours spent making it better than factory when new only to find out very few will appreciate the time spent and pay the price for a better than new boat. Congratulations Ron Pratt it is beautiful !!!
[ Post made via iPhone ]
[ Post made via iPhone ]
-
alaskastreamin
- Hydrostream know it all
- Posts: 513
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST rebuild ( Blown out bottom)
Thanks Phil!!
You’re next.. hope you start a re-gel thread.
See you in a few hours…..
[ Post made via iPhone ]
You’re next.. hope you start a re-gel thread.
See you in a few hours…..
[ Post made via iPhone ]
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
alaskastreamin
- Hydrostream know it all
- Posts: 513
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST rebuild ( Blown out bottom)
Spent Monday block sanding the deck.
Tuesday buffing and putting the dash back together, shifter, etc…
Today got the gas tank in, bilge pump installed, steering put back in, made a pro-trim style bracket for motor trim switch, battery tray, drilled holes for bilge thru hull and rigging hoses. Got the wiring cleaned up in the back. Added a terminal block for the grounds. Keeps the battery posts tidy.
[ Post made via iPhone ]
Tuesday buffing and putting the dash back together, shifter, etc…
Today got the gas tank in, bilge pump installed, steering put back in, made a pro-trim style bracket for motor trim switch, battery tray, drilled holes for bilge thru hull and rigging hoses. Got the wiring cleaned up in the back. Added a terminal block for the grounds. Keeps the battery posts tidy.
[ Post made via iPhone ]
- Attachments
-
- F865EB86-2F9C-4708-837D-707E55887142.jpeg (242.07 KiB) Viewed 35843 times
-
- 2B07E9F5-5320-4985-996B-D5A2F83D24C7.jpeg (173.59 KiB) Viewed 35843 times
-
- C3B46850-4193-467E-890E-EDFED37FEE32.jpeg (291.64 KiB) Viewed 35843 times
-
- 07D46254-C710-4D46-A317-F18523A580AF.jpeg (273.54 KiB) Viewed 35843 times
-
- F849465F-2D8E-4A1C-A22E-8ADC4ED6DCF3.jpeg (289.01 KiB) Viewed 35843 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
alaskastreamin
- Hydrostream know it all
- Posts: 513
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST rebuild ( Blown out bottom)
Windscreen is on. Looks really good!!
Rigging continues….
She’s going to the scales tomorrow.
[ Post made via iPhone ]
Rigging continues….
She’s going to the scales tomorrow.
[ Post made via iPhone ]
- Attachments
-
- DEC86067-104A-4D87-AAAC-3DA2F6C87C0D.jpeg (283.37 KiB) Viewed 35799 times
-
- 6AED9E47-8EC6-4103-A77D-3B133E480B59.jpeg (360.48 KiB) Viewed 35799 times
-
- A7DED0D8-C5EA-4485-9B5A-06FFCE33B600.jpeg (466.36 KiB) Viewed 35799 times
-
- 544B9F09-D932-42D7-BF08-927362649F15.jpeg (366.07 KiB) Viewed 35799 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Random Topics
- Replies
- Views
- Last post
-
- 7Replies
- 7409 Views
- Last post by koukrapock
Aug 20, 2010 10:37 am
-
- 10Replies
- 11941 Views
- Last post by jacklake2003
Jun 16, 2010 10:22 am
-
- 2Replies
- 4530 Views
- Last post by RussF
Jun 17, 2010 4:46 am
-
- 1Replies
- 6588 Views
- Last post by LSaupe
Jun 16, 2010 6:48 pm
-
- 2Replies
- 7252 Views
- Last post by RussF
Jun 18, 2010 6:06 am