Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
1975 Vector rebuild
1975 Vector rebuild
Hello,
I am new to the site, and I am in the process of restoring a 1975 Vector. I have seen several interesting builds outlined on this forum and the information provided has been very helpful.
So, I wanted to start by saying thanks to all who post.
I have owned this Vector for over 20 years, and it needed a new core and transom when we got, so I have yet to have it on the water. After 20+ years I am now in the process of rebuilding it.
The pad on this boat is different than others I have seen, and I was wondering if anyone has seen a Vector with a pad like this, and may have some thoughts on how it would handle?
Any thoughts or input would be greatly appreciated.
Thanks
Phil
I am new to the site, and I am in the process of restoring a 1975 Vector. I have seen several interesting builds outlined on this forum and the information provided has been very helpful.
So, I wanted to start by saying thanks to all who post.
I have owned this Vector for over 20 years, and it needed a new core and transom when we got, so I have yet to have it on the water. After 20+ years I am now in the process of rebuilding it.
The pad on this boat is different than others I have seen, and I was wondering if anyone has seen a Vector with a pad like this, and may have some thoughts on how it would handle?
Any thoughts or input would be greatly appreciated.
Thanks
Phil
- Attachments
-
- 20220822_121848.jpg (444.42 KiB) Viewed 11439 times
-
- 20220901_163236.jpg (345.9 KiB) Viewed 11439 times
Re: 1975 Vector rebuild
Here is a picture of the inside
- Attachments
-
- image.jpg (432.94 KiB) Viewed 11438 times
-
- Site Admin
- Posts: 3978
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 352 times
- Been thanked: 82 times
- Contact:
Re: 1975 Vector rebuild
That transom!?!?!? What in the world happened? Yikes! Where did the splashwell go?!?!? Also, that is not a stock pad on that. Something doesnt look right on that boat either. What are the first 3 letters of the HIN (Hull Identification Number).
Also, the rear of the wings dont flair out at all in the one picture and all Vectors do. Vkings dont but thats not a Vking just by looking at the inside. Here is my Vector and you can see what im talking about. Also, where the splashwell should be, it doesnt look like there has ever been one on yours. Look at the HIN and post it if you can.
Also, the rear of the wings dont flair out at all in the one picture and all Vectors do. Vkings dont but thats not a Vking just by looking at the inside. Here is my Vector and you can see what im talking about. Also, where the splashwell should be, it doesnt look like there has ever been one on yours. Look at the HIN and post it if you can.
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Re: 1975 Vector rebuild
Hi, thanks for looking at it, I have been trying to figure out more about this boat as well. I am really hoping it will handle ok when finished. I have never had it on the water.
The transom is 2 in thick, 5 layers of ply plus had aluminum plates inside and out.
I will post some picks of the hull number and id tag.
When I picked this boat up about 25 years ago, I had taken by Baker Marine and talk to Ron and Jeff Baker. Ron said it definitely looked different and thought it looked as though it was done at the Factory. He also mentioned it looked like a different deck was on the hull. You can see an area where they meet it looks different.
Shortly after we bought the boat up my wife and I had a few kids, and the boat was put in a barn for many years. The kids are done with college now, so I decided to pull the old stream out of the barn and start trying to rebuild it. But would love to know the boat's history.
Thanks again Phil
The transom is 2 in thick, 5 layers of ply plus had aluminum plates inside and out.
I will post some picks of the hull number and id tag.
When I picked this boat up about 25 years ago, I had taken by Baker Marine and talk to Ron and Jeff Baker. Ron said it definitely looked different and thought it looked as though it was done at the Factory. He also mentioned it looked like a different deck was on the hull. You can see an area where they meet it looks different.
Shortly after we bought the boat up my wife and I had a few kids, and the boat was put in a barn for many years. The kids are done with college now, so I decided to pull the old stream out of the barn and start trying to rebuild it. But would love to know the boat's history.
Thanks again Phil
- Attachments
-
- 20220822_121831.jpg (377.87 KiB) Viewed 11382 times
-
- 20220701_184849.jpg (488.77 KiB) Viewed 11382 times
-
- 195538.jpg (610.2 KiB) Viewed 11382 times
-
- Site Admin
- Posts: 3978
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 352 times
- Been thanked: 82 times
- Contact:
Re: 1975 Vector rebuild
Its definitely a Hydrostream Vector. I would say someone at some point had modified that boat cause I have never seen a vector, or any hydrostream with a pad like that. Buddy of mine had a 75 Vector back in the day and sold it and it was totally redone but the new owner by a shop local to me, put that had the flat (concave) pad and not a small v pad.
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Re: 1975 Vector rebuild
Any thoughts on how it may handle? I am wondering if it will be more prone to chine walk.
[ Post made via Android ]
[ Post made via Android ]
-
- Hydrostream know it all
- Posts: 527
- Joined: Aug 08, 2011 10:22 pm
- Location: Peterborough Ontario
- Has thanked: 11 times
- Been thanked: 34 times
- Contact:
Re: 1975 Vector rebuild
That looks a lot like a sidewinder pad, not much fun over 55 mph. I have seen them modified into a v-pad and perform better
[ Post made via Android ]
[ Post made via Android ]
1988 Canadian Edition Vision Sold
1990 Hydrostream Virage Stage 3 Turbo
1990 Hydrostream Virage Stage 3 Turbo
Re: 1975 Vector rebuild
I am not certain, but I think the Allison Grand Sport has a similar pad.
At least I am hoping. From a description in a review on Wave to Wave it sounded like they do.
At least I am hoping. From a description in a review on Wave to Wave it sounded like they do.
Re: 1975 Vector rebuild
Here is a link to the Wave to Wave review. Hopefully it works
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=video&cd=&cad=rja&uact=8&ved=2ahUKEwjX3uHi5u_7AhVMkIkEHWYeBvQQtwJ6BAgGEAI&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3D8lxR_RCX08k&usg=AOvVaw1vjIihdnj_cZyVkOS1v-bq
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=video&cd=&cad=rja&uact=8&ved=2ahUKEwjX3uHi5u_7AhVMkIkEHWYeBvQQtwJ6BAgGEAI&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3D8lxR_RCX08k&usg=AOvVaw1vjIihdnj_cZyVkOS1v-bq
-
- Random Topics
- Replies
- Views
- Last post
-
- 11Replies
- 11004 Views
- Last post by Hippie459MN
Mar 27, 2014 9:17 am
-
- 6Replies
- 11531 Views
- Last post by VultureNo2
Mar 10, 2014 8:57 am
-
- 9Replies
- 8914 Views
- Last post by Laserman
Feb 15, 2014 8:25 pm
-
- 8Replies
- 7505 Views
- Last post by Rollo1968
Mar 14, 2014 12:59 pm
-
- 4Replies
- 5464 Views
- Last post by aaron78viper
Jan 28, 2014 1:59 pm
Who is online
Users browsing this forum: Bing [Bot] and 3 guests