Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
1981 Vector
-
- Getting my feet wet
- Posts: 18
- Joined: Jul 06, 2011 7:27 pm
- Location: Rochester,NY
- Contact:
1981 Vector
I went out on Honoye lake today with some friends and got a couple of runs in with his switzer. Here are a couple pics and a little video of the boat. Im still getting usto the feel of it and getting it up on the pad.
- Attachments
-
- CIMG1406.JPG (821.88 KiB) Viewed 6960 times
-
- CIMG1413.JPG (531.9 KiB) Viewed 6960 times
-
- CIMG1412.JPG (627.38 KiB) Viewed 6960 times
-
- CIMG1415.JPG (471.27 KiB) Viewed 6960 times
-
- Getting my feet wet
- Posts: 18
- Joined: Jul 06, 2011 7:27 pm
- Location: Rochester,NY
- Contact:
Re: 1981 Vector
Here is a little video not the best.... still learning how to drive her.
http://www.youtube.com/watch?v=QRy5Nfrvap8
http://www.youtube.com/watch?v=QRy5Nfrvap8
-
- Site Admin
- Posts: 3978
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 352 times
- Been thanked: 82 times
- Contact:
Re: 1981 Vector
Very nice!!! Loving the colors on that thing for sure.
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- HSF Supporting Vendor
- Posts: 1989
- Joined: Mar 29, 2009 11:38 pm
- Location: montgomery MN
- Contact:
Re: 1981 Vector
Looks great.
In my opinion it looks like you were trimmed a little high for top end running. Although I know how fun it is to trim up and put on a show.
In my opinion it looks like you were trimmed a little high for top end running. Although I know how fun it is to trim up and put on a show.
Samari on s&f
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
-
- Getting my feet wet
- Posts: 18
- Joined: Jul 06, 2011 7:27 pm
- Location: Rochester,NY
- Contact:
Re: 1981 Vector
Yea i think you are right. It seems like maybe i need a hydrolic-jack plate to bring the prop centerline up a bit, otherwise with it down i cant get it to come up on the pad. Or do you think it could be the prop not giving me enough bow lift?
Thanks,
Mike
Thanks,
Mike
-
- HSF Supporting Vendor
- Posts: 1989
- Joined: Mar 29, 2009 11:38 pm
- Location: montgomery MN
- Contact:
Re: 1981 Vector
What prop are you running and where is your propshaft in relation to the pad?
Samari on s&f
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
-
- Hydrostream Addict
- Posts: 344
- Joined: Apr 11, 2009 11:17 pm
- Location: Central Texas
- Has thanked: 1 time
- Contact:
-
- Getting my feet wet
- Posts: 18
- Joined: Jul 06, 2011 7:27 pm
- Location: Rochester,NY
- Contact:
Re: 1981 Vector
Yea i think i might scott. im just worried maybe going a little higher it mght effect it getting out of the hole more.
Ill measure when i get home to see where the prop centerline is, i want to say its around 3" or so below the pad. The boat has a 26 pitch prop on it ill get the part number to try to figure out more specs on it
Ill measure when i get home to see where the prop centerline is, i want to say its around 3" or so below the pad. The boat has a 26 pitch prop on it ill get the part number to try to figure out more specs on it
-
- Getting my feet wet
- Posts: 18
- Joined: Jul 06, 2011 7:27 pm
- Location: Rochester,NY
- Contact:
Re: 1981 Vector
Hey Chet the Prop centerline is about 2 1/4 from the bottom pad of the boat. The prop that it has is a Merc 26P Big Ear Chopper with weed cutters the part number is 48 89858 A-4 26P. Have you heard anything good about these props? looking to upgrade soon because this one has some cracks.
Thanks,
Mike
Thanks,
Mike
-
- Random Topics
- Replies
- Views
- Last post
-
- 35Replies
- 40264 Views
- Last post by JDChase
Jul 22, 2019 1:10 pm
-
- 3Replies
- 3234 Views
- Last post by 77viper
Feb 05, 2011 9:12 pm
-
- 5Replies
- 5876 Views
- Last post by Hippie459MN
Feb 11, 2011 8:39 pm
-
- 1Replies
- 3583 Views
- Last post by AFR
Feb 07, 2011 7:17 pm
-
- 5Replies
- 3855 Views
- Last post by DreamStream
Feb 12, 2011 10:45 pm
Who is online
Users browsing this forum: No registered users and 5 guests