Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
1985 evinrude crossflow 235hp cooling question
-
- Getting my feet wet
- Posts: 64
- Joined: Sep 24, 2013 6:38 pm
- Location: kettering ohio
- Contact:
1985 evinrude crossflow 235hp cooling question
will the motor get more flow run cooler with the thermostat and popits removed. g-p
-
- Hydrostream Addict
- Posts: 418
- Joined: Jun 22, 2010 5:22 pm
- Location: hohenwald, tn
- Contact:
Re: 1985 evinrude crossflow 235hp cooling question
yess it will but u need to keep temps around 130-155 anything below 130 can cold seize just as fast as being to hot i been running my mercury around 140-160 good temps
[ Post made via iPhone ]
[ Post made via iPhone ]
79 vector missing in action!!!!!
2006 vking center steer
2006 vking center steer
-
- Getting my feet wet
- Posts: 64
- Joined: Sep 24, 2013 6:38 pm
- Location: kettering ohio
- Contact:
-
- Hydrostream Addict
- Posts: 418
- Joined: Jun 22, 2010 5:22 pm
- Location: hohenwald, tn
- Contact:
Re: 1985 evinrude crossflow 235hp cooling question
if ull just take the spring off the poppet it will build slightly more pressure with good flow
[ Post made via iPhone ]
[ Post made via iPhone ]
79 vector missing in action!!!!!
2006 vking center steer
2006 vking center steer
-
- Getting my feet wet
- Posts: 64
- Joined: Sep 24, 2013 6:38 pm
- Location: kettering ohio
- Contact:
Re: 1985 evinrude crossflow 235hp cooling question
well i tryed it with out pop it springs out it ran too cold i ran for 15min drawing the pump water out of a 5 gal bucket to the nose cone 5/8 fitting with extended hose , electronic gun said 110 f. i put the springs back in, thanks for the pointer. gary
-
- Hydrostream Addict
- Posts: 418
- Joined: Jun 22, 2010 5:22 pm
- Location: hohenwald, tn
- Contact:
Re: 1985 evinrude crossflow 235hp cooling question
yea if u leave popit out and put washers in the heads and just start out with small holes and start working ur way up it will get hotter running in the water carrying aload of coarse so just keep tuning it in till u reach a good temp all around i got 5/16 washer holes in mine with no poput spring at 8 grand around 155-160 temp
[ Post made via iPhone ]
[ Post made via iPhone ]
79 vector missing in action!!!!!
2006 vking center steer
2006 vking center steer
-
- Getting my feet wet
- Posts: 64
- Joined: Sep 24, 2013 6:38 pm
- Location: kettering ohio
- Contact:
Re: 1985 evinrude crossflow 235hp cooling question
ok thats great info although my evinrude will only turn 6500 rpm its old year 1985 really just a big fishin motor. ha ha .gary
-
- Site Admin
- Posts: 3978
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 352 times
- Been thanked: 82 times
- Contact:
Re: 1985 evinrude crossflow 235hp cooling question
My 235 is also an 85 but mine has the factory off shore mid on it so it will be a noisy one.mitchielpricer wrote:ok thats great info although my evinrude will only turn 6500 rpm its old year 1985 really just a big fishin motor. ha ha .gary
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- Random Topics
- Replies
- Views
- Last post
-
- 1Replies
- 4414 Views
- Last post by streamin_demon
Oct 29, 2012 9:12 pm
-
- 1Replies
- 3591 Views
- Last post by YDOC462
Nov 01, 2012 11:15 am
-
- 6Replies
- 8493 Views
- Last post by seahorsemax
Aug 04, 2013 7:24 pm
-
- 4Replies
- 10385 Views
- Last post by orangecrush
Sep 23, 2013 7:01 pm
-
- 6Replies
- 4549 Views
- Last post by idvette
Nov 04, 2012 12:41 pm
Who is online
Users browsing this forum: No registered users and 3 guests