Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
new member with a 78 viper
-
- Regular
- Posts: 175
- Joined: Jun 03, 2012 8:29 pm
- Location: MA
- Been thanked: 7 times
- Contact:
Re: new member with a 78 viper
removed the float boxes. I cleaned them up a bit after the pics
some of the transom and splashwell fitment
some of the transom and splashwell fitment
-
- Regular
- Posts: 175
- Joined: Jun 03, 2012 8:29 pm
- Location: MA
- Been thanked: 7 times
- Contact:
Re: new member with a 78 viper
well not too much, it started getting too cold to lay glass so that has gone nowhere. BUT I did start tearing down the old seats to re cover them. Went to the fabric store and got some marine vinyl in grey and red to match the boat. That was a messy teardown. I will post a pic or two shortly. I did find the basic frame of the seats are fiberglass. Who knew!?
-
- Getting my feet wet
- Posts: 52
- Joined: Mar 10, 2011 5:46 pm
- Location: orange park florida
- Contact:
-
- Regular
- Posts: 175
- Joined: Jun 03, 2012 8:29 pm
- Location: MA
- Been thanked: 7 times
- Contact:
Re: new member with a 78 viper
I told you guys I was working on the new seat covers, and today I got the sewing machine going alright. so here is what I got done, needs a little more cushion on the seat to take up some slack I think.
- Attachments
-
- new vinyl 4.jpg (17.56 KiB) Viewed 29953 times
-
- new vinyl 3.jpg (18.19 KiB) Viewed 29953 times
-
- new vinyl 2.jpg (18.81 KiB) Viewed 29953 times
-
- new vinyl 1.jpg (16.31 KiB) Viewed 29953 times
-
- Regular
- Posts: 175
- Joined: Jun 03, 2012 8:29 pm
- Location: MA
- Been thanked: 7 times
- Contact:
Re: new member with a 78 viper
okay, so the time finally came, ordered up some balsa core and cabosil to bed it down, got the glass I will need, and I patched up these damaged spot on the bottom. Now, for the smaller chips in the strakes, and some sharpening on the edges, what should I use? Need guidance for the chip repairs along a lot of the strakes, and sharpening the edges near the rear
- Attachments
-
- hull repair pad.jpg (311.26 KiB) Viewed 29862 times
-
- hull repairs 5 14 14.jpg (418.07 KiB) Viewed 29862 times
-
- hull repair bow 5 14 14.jpg (323.72 KiB) Viewed 29862 times
-
- Regular
- Posts: 175
- Joined: Jun 03, 2012 8:29 pm
- Location: MA
- Been thanked: 7 times
- Contact:
Re: new member with a 78 viper
had some beautiful weather today, so I started my core install in the pad. have the boat hanging naturally from the bow eye and weight supported on the rear corner of the strakes that are at the bottom edges of the transom. nothing will be pushing on the flat parts of the hull, and it seems extremely straight that way. here is how it looks right now
- Attachments
-
- core in pad bedded, half glassed.jpg (368.79 KiB) Viewed 29836 times
-
- Regular
- Posts: 175
- Joined: Jun 03, 2012 8:29 pm
- Location: MA
- Been thanked: 7 times
- Contact:
Re: new member with a 78 viper
progress today
- Attachments
-
- splashwell delete being installed not glassed yet.jpg (351.36 KiB) Viewed 29829 times
-
- core being bedded in update.jpg (370.16 KiB) Viewed 29829 times
-
- core being bedded in update left.jpg (367.12 KiB) Viewed 29829 times
-
- Site Admin
- Posts: 3978
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 352 times
- Been thanked: 82 times
- Contact:
Re: new member with a 78 viper
Looking good!
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- Regular
- Posts: 175
- Joined: Jun 03, 2012 8:29 pm
- Location: MA
- Been thanked: 7 times
- Contact:
-
- Random Topics
- Replies
- Views
- Last post
-
- 5Replies
- 109326 Views
- Last post by Hippie459MN
Mar 10, 2022 10:00 pm
-
- 3Replies
- 132223 Views
- Last post by Hippie459MN
Mar 10, 2022 10:03 pm
-
- 5Replies
- 162388 Views
- Last post by Hippie459MN
Mar 25, 2022 2:11 pm
-
- 1Replies
- 165523 Views
- Last post by mickey12
May 20, 2022 1:33 pm
-
- 2Replies
- 173881 Views
- Last post by Hydrostream Bot
May 22, 2022 8:09 am
Who is online
Users browsing this forum: No registered users and 4 guests