Welcome to HydrostreamForums.com
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.

Registering only takes a few minutes and you can do so by CLICKING HERE

If you are a member, don't forget to log in to take full advantage of the forum.

No Jack plate on 86 Vegas

The place for all general Hydrostream discussions.
Post Reply
User avatar

Topic Author
love Hydrostream's
The new guy
The new guy
Posts: 6
Joined: May 20, 2010 11:59 am

No Jack plate on 86 Vegas

Post: # 5106Post love Hydrostream's »

Hi the Vegas that I'm going to buy has no jack plate the motor is mounted solid to the transom is there any problems I should look for and do I need a jack plate ? But I see that in a picture the Vegas skier boat the motor is solid mounted to with out a jack plate . I beleve that there is transom savers on the Vegas that I'm going to buy . I've been save sence I've been 12 years old or so to buy a hydrostream and I'm 37 now I'm not looking to go fast . Ive been in in a lot of Streams and my one famliy member like to play around pretty hard and we play on the WIS river and some time we get some big white caps so I've fell out of his vegas at slow speeds but his has a jack plate he bought his brand new and he has a big Rude for a motor on his vegas .I've drove his boat a few times but not fast . and my friendTom has a Venus black and silver fastes Hydrostram on Castle rock lake . but I'm scared I would ask one of them to come with to check the boat out with me but on is a farmer and Tom cant take off of work . but the owner is taking me out on the water for a test ride I can live with out a jack plate and just with power trim @ tilt . thank s for any info .
User avatar

Surface Scratcher
Hydrostream Addict
Hydrostream Addict
Posts: 344
Joined: Apr 11, 2009 11:17 pm
Location: Central Texas
Has thanked: 1 time

Re: No Jack plate on 86 Vegas

Post: # 5107Post Surface Scratcher »

Wow, where to begin, but first, what's the motor and prop your running?

Of course you don't need a jack plate unless your wanting more top speed , but then you will also need other accessories like a low water pickup and an appropriate prop.

From what I've read, the more set back the faster. I have 4.5 in. jack on my XT but Viper77 has 12 inches and his top speeds are considerably higher.

This article from Stream.org talks about an Xt without a plate. Enjoy :up:
http://www.hydrostream.org/TechTalk/VegasMercOpti175.htm
User avatar

77viper
HSF Supporting Vendor
HSF Supporting Vendor
Posts: 1989
Joined: Mar 29, 2009 11:38 pm
Location: montgomery MN

Re: No Jack plate on 86 Vegas

Post: # 5110Post 77viper »

Yep I ran 12" on mine but I thought my hull might be a little heavy from being water logged. I found out today my boat minus powerhead weighs 1422lbs. i will be looking at recoring and removing the foam and reweigh it.

Mine came with a 200 merc, no jackplate and a 25pitch high five prop. It was a blast out of the hole and midrange but lacked top end, all I could get out of it was upper 60's low 70's. With 12" setback a 27 srx and a lot of rpm I was in the upper 80's.
Samari on s&f
Chet Olson

75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
User avatar

Topic Author
love Hydrostream's
The new guy
The new guy
Posts: 6
Joined: May 20, 2010 11:59 am

Re: No Jack plate on 86 Vegas

Post: # 5115Post love Hydrostream's »

Thanks guys .you are awesome !and this forum is great and great people ! :boating:
Post Reply

  • Random Topics
    Replies
    Views
    Last post