Yes I just rolled it on. I went through one gallon, but probably could've used two as it went kinda thin in spots. Using a roller worked much better getting the little pin holes in the fiberglass filled. There were still a few pin holes in glass when I sprayed the gel and they don't want to fill in when the product was sprayed. It all got sanded anyway so I wasn't worried about the finish being rolled.
Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
1978 Viking resto-mod
-
- Regular
- Posts: 106
- Joined: Aug 01, 2018 11:05 am
- Location: Minneapolis Minnesota
- Has thanked: 151 times
- Been thanked: 50 times
- Contact:
Re: 1978 Viking resto-mod
'78 Viking/ '98 Mercury 225 ProMax
500+ pictures of build: https://www.flickr.com/photos/152974368@N02/albums/72157708863869223
Videos of build: https://www.youtube.com/channel/UCWRAfGZVq4a3R-W7JdJeFeQ/videos?view_as=subscriber
500+ pictures of build: https://www.flickr.com/photos/152974368@N02/albums/72157708863869223
Videos of build: https://www.youtube.com/channel/UCWRAfGZVq4a3R-W7JdJeFeQ/videos?view_as=subscriber
-
- Moderator
- Posts: 327
- Joined: Jul 19, 2016 6:58 pm
- Location: Oshawa, Ontario (near Toronto)
- Has thanked: 45 times
- Been thanked: 72 times
- Contact:
Re: 1978 Viking resto-mod
Did you sand the primer before spraying or just left it as is when you started spraying the gelcoat?
-
- Regular
- Posts: 106
- Joined: Aug 01, 2018 11:05 am
- Location: Minneapolis Minnesota
- Has thanked: 151 times
- Been thanked: 50 times
- Contact:
Re: 1978 Viking resto-mod
Block sanded with 80. I was told it has to be sanded before something else can go on top of it, it does form a "skin" for lack of a better term. But it sands very easy. Plus I wanted it to fill in small imperfections in the P14. You could see spots where the primer filled in 36g grinding marks in the fiberglass from removing the gel earlier. I probably could've done another layer of primer and round of block sanding to make it 100% perfect. But the gel goes down so thick it wouldn't make a difference. And the flake hides a lot flaws.
'78 Viking/ '98 Mercury 225 ProMax
500+ pictures of build: https://www.flickr.com/photos/152974368@N02/albums/72157708863869223
Videos of build: https://www.youtube.com/channel/UCWRAfGZVq4a3R-W7JdJeFeQ/videos?view_as=subscriber
500+ pictures of build: https://www.flickr.com/photos/152974368@N02/albums/72157708863869223
Videos of build: https://www.youtube.com/channel/UCWRAfGZVq4a3R-W7JdJeFeQ/videos?view_as=subscriber
-
- Regular
- Posts: 106
- Joined: Aug 01, 2018 11:05 am
- Location: Minneapolis Minnesota
- Has thanked: 151 times
- Been thanked: 50 times
- Contact:
Re: 1978 Viking resto-mod
Wet sanding and buffing is finished on the bottom and the boat is back on its new trailer! This stuff looks incredible in person, the pictures don't do it justice. Everything was wet sanded to 800 grit followed by a three stage buff using 3M perfect-it gelcoat products.
The deck has been sanded with 36g on a DA. I took the gel down until I started removing some of the original flake. There were a few stress cracks in the gelcoat that thankfully didn't go any deeper, those were sanded until the cracks were gone. A few coats of filler went on the dash and over old rigging holes. Everything is ready for primer which will go on this week.
The deck has been sanded with 36g on a DA. I took the gel down until I started removing some of the original flake. There were a few stress cracks in the gelcoat that thankfully didn't go any deeper, those were sanded until the cracks were gone. A few coats of filler went on the dash and over old rigging holes. Everything is ready for primer which will go on this week.
- Attachments
-
- IMG_6655.JPG (2.93 MiB) Viewed 6325 times
-
- IMG_6658.JPG (2.82 MiB) Viewed 6325 times
-
- IMG_6659.JPG (2.84 MiB) Viewed 6325 times
-
- IMG_6661.JPG (2.42 MiB) Viewed 6325 times
-
- IMG_6663.JPG (2.26 MiB) Viewed 6325 times
-
- IMG_6668.JPG (2.39 MiB) Viewed 6325 times
-
- IMG_6682.JPG (2.09 MiB) Viewed 6325 times
-
- IMG_6683.JPG (2.18 MiB) Viewed 6325 times
-
- IMG_6689.JPG (2.46 MiB) Viewed 6325 times
-
- IMG_6690.JPG (2.23 MiB) Viewed 6325 times
'78 Viking/ '98 Mercury 225 ProMax
500+ pictures of build: https://www.flickr.com/photos/152974368@N02/albums/72157708863869223
Videos of build: https://www.youtube.com/channel/UCWRAfGZVq4a3R-W7JdJeFeQ/videos?view_as=subscriber
500+ pictures of build: https://www.flickr.com/photos/152974368@N02/albums/72157708863869223
Videos of build: https://www.youtube.com/channel/UCWRAfGZVq4a3R-W7JdJeFeQ/videos?view_as=subscriber
-
- Site Admin
- Posts: 3974
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 350 times
- Been thanked: 82 times
- Contact:
Re: 1978 Viking resto-mod
Thing is looking AWESOME!
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- Regular
- Posts: 106
- Joined: Aug 01, 2018 11:05 am
- Location: Minneapolis Minnesota
- Has thanked: 151 times
- Been thanked: 50 times
- Contact:
Re: 1978 Viking resto-mod
In the month since my last post here has what's gone down. The deck was rolled with primer, block sanded with 80g. Sprayed with a second coat of primer, block sanded agin. Gel coat/flake was sprayed. The wet sanding process has begun, the dash and everything forward has been block sanded with 240g.
- Attachments
-
- IMG_6694.JPG (2.17 MiB) Viewed 6292 times
-
- IMG_6703.jpg (2.19 MiB) Viewed 6292 times
-
- IMG_6715.JPG (1.94 MiB) Viewed 6292 times
-
- IMG_6727.jpg (2.31 MiB) Viewed 6292 times
-
- IMG_6728.JPG (2.24 MiB) Viewed 6292 times
-
- IMG_6729.JPG (2.09 MiB) Viewed 6292 times
-
- IMG_6732 copy.jpg (1.91 MiB) Viewed 6292 times
-
- IMG_6733.JPG (2.78 MiB) Viewed 6292 times
-
- IMG_6734.jpg (2.76 MiB) Viewed 6292 times
-
- IMG_6737.JPG (2.61 MiB) Viewed 6292 times
-
- IMG_6738.JPG (2.46 MiB) Viewed 6292 times
-
- IMG_6741.JPG (2.4 MiB) Viewed 6292 times
'78 Viking/ '98 Mercury 225 ProMax
500+ pictures of build: https://www.flickr.com/photos/152974368@N02/albums/72157708863869223
Videos of build: https://www.youtube.com/channel/UCWRAfGZVq4a3R-W7JdJeFeQ/videos?view_as=subscriber
500+ pictures of build: https://www.flickr.com/photos/152974368@N02/albums/72157708863869223
Videos of build: https://www.youtube.com/channel/UCWRAfGZVq4a3R-W7JdJeFeQ/videos?view_as=subscriber
-
- Regular
- Posts: 106
- Joined: Aug 01, 2018 11:05 am
- Location: Minneapolis Minnesota
- Has thanked: 151 times
- Been thanked: 50 times
- Contact:
Re: 1978 Viking resto-mod
Thank you! Finish sanding is done and buffing has begun.
- Attachments
-
- IMG_6771 copy.jpg (2.73 MiB) Viewed 6281 times
-
- IMG_6769 copy.jpg (2.22 MiB) Viewed 6281 times
-
- IMG_6770.JPG (2.7 MiB) Viewed 6281 times
-
- IMG_6767 copy.jpg (2.62 MiB) Viewed 6281 times
'78 Viking/ '98 Mercury 225 ProMax
500+ pictures of build: https://www.flickr.com/photos/152974368@N02/albums/72157708863869223
Videos of build: https://www.youtube.com/channel/UCWRAfGZVq4a3R-W7JdJeFeQ/videos?view_as=subscriber
500+ pictures of build: https://www.flickr.com/photos/152974368@N02/albums/72157708863869223
Videos of build: https://www.youtube.com/channel/UCWRAfGZVq4a3R-W7JdJeFeQ/videos?view_as=subscriber
-
- Regular
- Posts: 106
- Joined: Aug 01, 2018 11:05 am
- Location: Minneapolis Minnesota
- Has thanked: 151 times
- Been thanked: 50 times
- Contact:
Re: 1978 Viking resto-mod
Fiberglass and gelcoat work is complete! I ended up doing another round of sanding and buffing. Then pulled it out in the sun for the first time in two years. Also set the windshield on it for a few pictures. Let the rigging begin!
- Attachments
-
- IMG_6836 copy.jpg (1.58 MiB) Viewed 6262 times
-
- IMG_6842.JPG (1.46 MiB) Viewed 6262 times
-
- IMG_6854.JPG (2.84 MiB) Viewed 6264 times
-
- IMG_6852.JPG (2.46 MiB) Viewed 6264 times
-
- IMG_6853.JPG (2.57 MiB) Viewed 6264 times
'78 Viking/ '98 Mercury 225 ProMax
500+ pictures of build: https://www.flickr.com/photos/152974368@N02/albums/72157708863869223
Videos of build: https://www.youtube.com/channel/UCWRAfGZVq4a3R-W7JdJeFeQ/videos?view_as=subscriber
500+ pictures of build: https://www.flickr.com/photos/152974368@N02/albums/72157708863869223
Videos of build: https://www.youtube.com/channel/UCWRAfGZVq4a3R-W7JdJeFeQ/videos?view_as=subscriber
-
- Regular
- Posts: 187
- Joined: Aug 15, 2012 9:18 pm
- Location: Deerfield, Mi
- Been thanked: 12 times
- Contact:
Re: 1978 Viking resto-mod
Boy, I know that feeling when you pulled that out in the sun! Definitely boosts the motivation. Looks great any the trailer is cool too!
[ Post made via iPhone ]
[ Post made via iPhone ]
-
- Random Topics
- Replies
- Views
- Last post
-
- 3Replies
- 11025 Views
- Last post by Hippie459MN
Dec 24, 2018 9:30 pm
-
- 1Replies
- 7837 Views
- Last post by Hippie459MN
Dec 25, 2018 12:22 pm
-
- 27Replies
- 269312 Views
- Last post by Hippie459MN
Jul 05, 2019 7:18 am
-
- 38Replies
- 61166 Views
- Last post by RussF
Jul 15, 2019 11:19 am
-
- 3Replies
- 10905 Views
- Last post by pritch5
Feb 10, 2019 10:35 pm
Who is online
Users browsing this forum: No registered users and 2 guests