Welcome to HydrostreamForums.com
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.

Registering only takes a few minutes and you can do so by CLICKING HERE

If you are a member, don't forget to log in to take full advantage of the forum.

Hydrostream Hustlers pics with Chrysler Stacker racers !!!!!

Restoring your Hydrostream or just giving it a small makeover? What better place than to show off your project. Big or small.
Post Reply
User avatar

Topic Author
HustlerV
Getting my feet wet
Getting my feet wet
Posts: 17
Joined: Mar 30, 2009 1:44 am
Location: Rhinelander, Wisconsin

Hydrostream Hustlers pics with Chrysler Stacker racers !!!!!

Post: # 16143Post HustlerV »

I have 3 Hydrostream Hustler Vpads.......My first Hustler recieved a 105hp Chrysler with racing gearfoot no stacks ....That Hustler( not shown here) reached 70mph at 6000 rpm and handled so well, I decided to dig out my other Factory Chrysler racers from my collection and put them on the 2 remaining Hydrostream Hustlers

The pictures below are of my remaining 2 Hydrostream Hustlers 11.6 ft boats........I removed the Johnson 75 Stinger outboards and placed a 135hp Stacker Racer on the Green Boat and then added a 150hp Chrysler Stacker Racer to the Red Boat

Chrysler made 2 Factory Race engines in the 70's ......The 135hp Stacker Racer and the 150hp Stacker Racer......

These motors have all been test run and the Boats all handle well.........Motors are 225 lbs and spin 6000 rpm......These are direct drive gear cases that are 7% overdrive from the factory........I am running 16pitch-- 2 blade Chrysler Racing props..........I upgraded the Motorola ignitions and the dual pumps in each outboard....timing is set at 32..........Gas used is 50/50 Jet Blue mixed with premium with 50 to 1 oil mix

The 150 has 190 lbs compression from the factory

The 135 has 180 lbs compression from the factory

Neither motor came from the factory with tilt and trim

According to Howard Pipkorn, less than 10 Hydrostream Vpads were built between 1984 thru 90....all pre 84 Hustlers are tunnel boats

Factory racing Chrysler Stacker outboards are very rare ....Stack filler blocks and stacks are water cooled

Factory cowls with exhaust cut outs have been removed

Motor height /Gearcase point is 1 inch below the hull

Prop number P411

Chrysler also made the 105 and 120 in racing form.......Stacks did not come with those outboards

Hope you enjoy the photos

I have 4 Johnson 75 Stingers with the Short shafts and nitro cases to sell ... Please contact me at Bradob1@aol.com
please contact me if you are looking for one and I will provide pics and prices

Brad K Rhinelander Wi and Canton Ga.
Attachments
000_2135.jpg
000_2135.jpg (458.24 KiB) Viewed 6961 times
000_2133.jpg
000_2133.jpg (466.34 KiB) Viewed 6961 times
000_2132.jpg
000_2132.jpg (497.2 KiB) Viewed 6961 times
000_2128.jpg
000_2128.jpg (449.88 KiB) Viewed 6961 times
000_2126.jpg
000_2126.jpg (588.22 KiB) Viewed 6961 times
000_2124.jpg
000_2124.jpg (524.51 KiB) Viewed 6961 times
Last edited by HustlerV on Aug 06, 2012 11:00 pm, edited 1 time in total.
User avatar

idvette
Hydrostream know it all
Hydrostream know it all
Posts: 527
Joined: Aug 08, 2011 10:22 pm
Location: Peterborough Ontario
Has thanked: 11 times
Been thanked: 34 times

Re: Hydrostream Hustlers pics with Chrysler Stacker racers !

Post: # 16144Post idvette »

Beautiful collection!!!

[ Post made via BlackBerry ] Image
1988 Canadian Edition Vision Sold
1990 Hydrostream Virage Stage 3 Turbo
User avatar

jacklake2003
Regular
Regular
Posts: 134
Joined: Apr 05, 2009 11:05 am

Re: Hydrostream Hustlers pics with Chrysler Stacker racers !

Post: # 16145Post jacklake2003 »

Awesome! I didn't know Chrysler outboard could make anything that nice!
Post Reply

  • Random Topics
    Replies
    Views
    Last post