Viper windshield removal.

[rev.ronnie]

Need to remove the windshield frame, one side needs a little straightening and I don't want to chance breaking the perfect windshield.

Have not tried to remove it yet, how does it come off in the front, top of the windshield?

Thanks, Ron

[ Post made via Mobile Device ]

[RussF]

Hippie took his off he should be able to tell you how

[Hippie459MN]

Ronnie, Check out this post where I removed what was left of my windshield from the frame. Hopefully that will help.

http://www.hydrostreamforums.com/viewtopic.php?f=13&t=1171&p=8751#p8753

[rev.ronnie]

Excellent, exactly what I was looking for!
Thanks!

[ Post made via Mobile Device ]

[rev.ronnie]

I tried to I'd it, but I didn't get anywhere. I'm way to scared of breaking or scuffing the windsheild to get to aggressive. I wish I could find someone who is versed in taking these things off in one piece and just pay to have it done. I really want the frame straightened but again, I'm too scared to try to do it with it attached. If this windsheild broke, I'd never forgive myself..

[ Post made via Mobile Device ]

[Hippie459MN]

I think if you used a bunch of small pieces from an old hose clamp (or something similar) on both sides at each clip (There is a lot of them) all at once then you could pull it right out. I got thinking about that the other day and I dont see why that wouldnt work.

Where is it bent at? Can you post a picture? I know Chet was going to try and straighten one out but never did.

Little OT but I am going to try and remove the ipad from the mobile list so you see the regular site. Should make posting pictures easier for ya.

[rev.ronnie]

The frame is bent on the passenger side, like it got leaned on. It's a couple inches down, and has a slight twist to it. It has a little bend at the attaching point of the deck too. Someone probably sat on it or something dumb.

[ Post made via Mobile Device ]