Welcome to HydrostreamForums.com
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register. We're better than Facebook.
Registering only takes a few minutes and you can do so by CLICKING HERE
If you are a member, don't forget to log in to take full advantage of the forum.
Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Ok been bothering Hipster and Chet about a stumbling Looper 150.
-Cleaned carbs
-sprayed with cleaner/ rinsed with gas
-don't have compressed air to blow out orifices (this could be it)
-changed plugs
-compression decent
-will not wind out
-hard to start cold
-hard to get on plain
be more vigorous with the carb. cleaning? Any tips? Suggestions? First time out had little hints of full power now, not so much...
I wanted to ask you about that is it supposed to be pointing down? or forward? he he when I c=got the motor it was pointing back so was getting too much fuel