So I got a call from a guy wanting me to look at a merc 150 that lost a locator pin and ring. I found out he lives about 2 miles from my parents house so I told him I would stop by and give him a estimate. Once I get to the house I see this big shop with 4 patio doors, looks real nice. After talking for a bit we went inside and it's split in two sections, one with a nice lift and a Chrysler crossfire as well as a srt charger. At the back is a mirrored glass door that said RACE SHOP. I had to ask what was in there, he said his drag car was in there and he let me check it out. After walking through the door I had to ask if I could take some pictures.
It has a full carbon fiber body the doors weigh under 30 pounds and from the two of us lifting off the front clip it can't weigh 100. The motor is a all aluminum hemi with twin turbos making 3500-4000 horsepower depending on the tune.
Welcome to HydrostreamForums.com
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.
Registering only takes a few minutes and you can do so by CLICKING HERE
If you are a member, don't forget to log in to take full advantage of the forum.
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.
Registering only takes a few minutes and you can do so by CLICKING HERE
If you are a member, don't forget to log in to take full advantage of the forum.
interesting side job
interesting side job
Samari on s&f
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
-
- Site Admin
- Posts: 3988
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 356 times
- Been thanked: 83 times
- Contact:
Re: interesting side job
Dang!!! Not thats a car right there even if it is mopar (Monday Order Parts And Repair)
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Re: interesting side job
77viper wrote:So I got a call from a guy wanting me to look at a merc 150 that lost a locator pin and ring. I found out he lives about 2 miles from my parents house so I told him I would stop by and give him a estimate. Once I get to the house I see this big shop with 4 patio doors, looks real nice. After talking for a bit we went inside and it's split in two sections, one with a nice lift and a Chrysler crossfire as well as a srt charger. At the back is a mirrored glass door that said RACE SHOP. I had to ask what was in there, he said his drag car was in there and he let me check it out. After walking through the door I had to ask if I could take some pictures.
It has a full carbon fiber body the doors weigh under 30 pounds and from the two of us lifting off the front clip it can't weigh 100. The motor is a all aluminum hemi with twin turbos making 3500-4000 horsepower depending on the tune.
Thats a badass....nothing like a pro-mod in the back to tinker on!
-
- Random Topics
- Replies
- Views
- Last post
-
- 10Replies
- 11037 Views
- Last post by Hippie459MN
May 08, 2011 8:16 am
-
- 6Replies
- 5277 Views
- Last post by VultureNo2
Feb 24, 2010 1:57 pm
-
- 3Replies
- 4025 Views
- Last post by Hippie459MN
Feb 24, 2010 10:37 am
-
- 1Replies
- 3397 Views
- Last post by Hippie459MN
Feb 23, 2010 8:49 pm
-
- 1Replies
- 3345 Views
- Last post by Hippie459MN
Feb 23, 2010 8:50 pm