Hello all! After some time off the board and some shop time on my vision I have found that the new floor new stringers and new carpet are on top of a good core.
I am looking to prop my new toy to hit the mid 70s but also be somewhat stable at top end. Should I go three or four blade. The previous owner had a 26 laser 2. Very interested in any and all comments
Welcome to HydrostreamForums.com
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.
Registering only takes a few minutes and you can do so by CLICKING HERE
If you are a member, don't forget to log in to take full advantage of the forum.
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.
Registering only takes a few minutes and you can do so by CLICKING HERE
If you are a member, don't forget to log in to take full advantage of the forum.
Merc xr2 prop on vision ce
-
Andrew Vision
- Getting my feet wet
- Posts: 71
- Joined: Oct 21, 2012 6:54 pm
- Location: Oshawa On Canada
- Been thanked: 1 time
-
idvette
- Hydrostream know it all
- Posts: 527
- Joined: Aug 08, 2011 10:22 pm
- Location: Peterborough Ontario
- Has thanked: 11 times
- Been thanked: 34 times
Re: Merc xr2 prop on vision ce
Post up some pictures already!!! Lol.. I bought mine with a 30 pitch on it, 3 blade Merc chopper, and I had a hard time controlling the boat. I traded for a 23 3 blade chopper and it made a world if difference. I' like to try out a cleaver in the 26-28 range....
[ Post made via iPhone ]
[ Post made via iPhone ]
1988 Canadian Edition Vision Sold
1990 Hydrostream Virage Stage 3 Turbo
1990 Hydrostream Virage Stage 3 Turbo
-
idvette
- Hydrostream know it all
- Posts: 527
- Joined: Aug 08, 2011 10:22 pm
- Location: Peterborough Ontario
- Has thanked: 11 times
- Been thanked: 34 times
Re: Merc xr2 prop on vision ce
This boat's starting to sound familiar to me... Vision with an xr2 and a lazer 2... Is it red with a weight fixture under the deck???
[ Post made via iPhone ]
[ Post made via iPhone ]
1988 Canadian Edition Vision Sold
1990 Hydrostream Virage Stage 3 Turbo
1990 Hydrostream Virage Stage 3 Turbo
-
Andrew Vision
- Getting my feet wet
- Posts: 71
- Joined: Oct 21, 2012 6:54 pm
- Location: Oshawa On Canada
- Been thanked: 1 time
-
Andrew Vision
- Getting my feet wet
- Posts: 71
- Joined: Oct 21, 2012 6:54 pm
- Location: Oshawa On Canada
- Been thanked: 1 time
-
Andrew Vision
- Getting my feet wet
- Posts: 71
- Joined: Oct 21, 2012 6:54 pm
- Location: Oshawa On Canada
- Been thanked: 1 time
-
idvette
- Hydrostream know it all
- Posts: 527
- Joined: Aug 08, 2011 10:22 pm
- Location: Peterborough Ontario
- Has thanked: 11 times
- Been thanked: 34 times
Re: Merc xr2 prop on vision ce
I was going to buy it but bought mine instead. I upset the guy when I backed out of the deal, but I liked mine more 
[ Post made via iPhone ]
[ Post made via iPhone ]
1988 Canadian Edition Vision Sold
1990 Hydrostream Virage Stage 3 Turbo
1990 Hydrostream Virage Stage 3 Turbo
-
Andrew Vision
- Getting my feet wet
- Posts: 71
- Joined: Oct 21, 2012 6:54 pm
- Location: Oshawa On Canada
- Been thanked: 1 time
Re: Merc xr2 prop on vision ce
hahaha Yeah he told me about that! Didn't know it was you. What would you have done to it if you would have bought it?
-
idvette
- Hydrostream know it all
- Posts: 527
- Joined: Aug 08, 2011 10:22 pm
- Location: Peterborough Ontario
- Has thanked: 11 times
- Been thanked: 34 times
Re: Merc xr2 prop on vision ce
It wasn't finished when I was dealing on it, the floor had just been laid, was complete just not finished. I would have recognized pictures if you put them up and could have told you the condition of the boat lol
[ Post made via iPhone ]
[ Post made via iPhone ]
1988 Canadian Edition Vision Sold
1990 Hydrostream Virage Stage 3 Turbo
1990 Hydrostream Virage Stage 3 Turbo
-
idvette
- Hydrostream know it all
- Posts: 527
- Joined: Aug 08, 2011 10:22 pm
- Location: Peterborough Ontario
- Has thanked: 11 times
- Been thanked: 34 times
Re: Merc xr2 prop on vision ce
I would have just driven it, see what it wanted.
[ Post made via iPhone ]
[ Post made via iPhone ]
1988 Canadian Edition Vision Sold
1990 Hydrostream Virage Stage 3 Turbo
1990 Hydrostream Virage Stage 3 Turbo
-
- Random Topics
- Replies
- Views
- Last post
-
- 35Replies
- 59933 Views
- Last post by JDChase
Jul 22, 2019 1:10 pm
-
- 3Replies
- 4640 Views
- Last post by 77viper
Feb 05, 2011 9:12 pm
-
- 5Replies
- 7500 Views
- Last post by Hippie459MN
Feb 11, 2011 8:39 pm
-
- 1Replies
- 4920 Views
- Last post by AFR
Feb 07, 2011 7:17 pm
-
- 5Replies
- 5662 Views
- Last post by DreamStream
Feb 12, 2011 10:45 pm