Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
1986 VKing YT project 99% DONE
-
- The new guy
- Posts: 5
- Joined: Nov 25, 2016 3:52 pm
- Location: Moline, Illinois
- Contact:
1986 VKing YT project 99% DONE
I decided I should get on here and document my 1986 Hydrostream VKing YT restoration since I have not put a definitive restoration document anywhere on the internet. I bought this boat for $600 bucks in Wisconsin. The boat was basically a shell in pretty rough shape. I started this project with the intention of building one of the baddest VKing YT's in the country. I was going to power it with OMC grunt to boot. The hard work has payed off with the boat going a GPS 104 this past summer with a 3 liter OMC built by me. Everything on this boat was built by me, including the engine. The only thing I didn't build was the lower unit which was done by Titus, and is an amazing piece. This fall I built a 6.5 inch rod 3.3 liter Frankenstein with the hopes of going faster next summer. I have a large number of pictures, but I'm not going to share every single thing from the build, as I have spent an enormous personal effort figuring out how to make these VKing YT's extremely fast without building it like a comp boat. Make no mistake, the boat is still pretty damn light, but is also amazingly strong. It is incredibly easy to drive with a little practice and will easily achieve 100+ even on dead flat water. No ripple needed to make it run free and fast.
- Attachments
-
- 20160413_142254.jpg (931.23 KiB) Viewed 13985 times
-
- 20160326_163127.jpg (1013.44 KiB) Viewed 13985 times
-
- 20160326_163030.jpg (919.45 KiB) Viewed 13985 times
-
- 20160326_163025.jpg (983.26 KiB) Viewed 13985 times
-
- 20160313_170659.jpg (595.81 KiB) Viewed 13985 times
-
- 20160228_162042.jpg (598.35 KiB) Viewed 13985 times
-
- 20160228_162018.jpg (859.5 KiB) Viewed 13985 times
-
- 20160228_161919.jpg (709.87 KiB) Viewed 13985 times
-
- The new guy
- Posts: 5
- Joined: Nov 25, 2016 3:52 pm
- Location: Moline, Illinois
- Contact:
1986 VKing YT project 99% DONE
More pics
- Attachments
-
- 20161109_122643.jpg (322 KiB) Viewed 13984 times
-
- 20161106_182041.jpg (338.47 KiB) Viewed 13984 times
-
- 20161019_182420.jpg (251.91 KiB) Viewed 13984 times
-
- 20161019_180228.jpg (225.49 KiB) Viewed 13984 times
-
- 20161019_180122.jpg (347.29 KiB) Viewed 13984 times
-
- 20151206_110308.jpg (308.7 KiB) Viewed 13984 times
-
- 20151206_103642 (1).jpg (211.21 KiB) Viewed 13984 times
-
- 20151205_174216.jpg (321.47 KiB) Viewed 13984 times
-
- 20151118_150852.jpg (448.94 KiB) Viewed 13984 times
-
- 20151114_120544.jpg (322.22 KiB) Viewed 13984 times
-
- 20151107_112050.jpg (346.3 KiB) Viewed 13984 times
-
- 20151105_151819.jpg (405.98 KiB) Viewed 13984 times
-
- 20151028_153459.jpg (343.75 KiB) Viewed 13984 times
-
- 20151027_092401.jpg (456.09 KiB) Viewed 13984 times
-
- Regular
- Posts: 134
- Joined: Apr 05, 2009 11:05 am
- Contact:
-
- The new guy
- Posts: 5
- Joined: Nov 25, 2016 3:52 pm
- Location: Moline, Illinois
- Contact:
1986 VKing YT project 99% DONE
It is cored. Go 3 or 4 pictures up. Core is the gray material being applied to the hull.
[ Post made via Android ]
[ Post made via Android ]
-
- Moderator
- Posts: 327
- Joined: Jul 19, 2016 6:58 pm
- Location: Oshawa, Ontario (near Toronto)
- Has thanked: 45 times
- Been thanked: 72 times
- Contact:
1986 VKing YT project 99% DONE
That's some funny-looking balsa core you got there.
What is it actually?
What is it actually?
-
- The new guy
- Posts: 5
- Joined: Nov 25, 2016 3:52 pm
- Location: Moline, Illinois
- Contact:
1986 VKing YT project 99% DONE
All the products I used were from Arjay. Only wood used in this project was the floor. Core will never ever go bad again.
[ Post made via Android ]
[ Post made via Android ]
-
- Moderator
- Posts: 327
- Joined: Jul 19, 2016 6:58 pm
- Location: Oshawa, Ontario (near Toronto)
- Has thanked: 45 times
- Been thanked: 72 times
- Contact:
1986 VKing YT project 99% DONE
Well it's not composite sheets.
Looks like core bond putty?
[ Post made via Android ]
Looks like core bond putty?
[ Post made via Android ]
-
- The new guy
- Posts: 5
- Joined: Nov 25, 2016 3:52 pm
- Location: Moline, Illinois
- Contact:
1986 VKing YT project 99% DONE
I thickened their transom compound and used that to make a core.
[ Post made via Android ]
[ Post made via Android ]
-
- The new guy
- Posts: 11
- Joined: Feb 23, 2018 10:20 pm
- Location: Amityville, NY
- Has thanked: 2 times
- Contact:
Re: 1986 VKing YT project 99% DONE
Hello brutalvking
I am going to be recoring my 87 Valero yt this spring and I'm looking at different materials besides balsa. What is the name of what you used? How has it held up? Did you lay some glass under it or just over. Is it vinyl ester resin or epoxy.
Also I am thinking about changing out the waterlogged foam . Did you do this? That is some serious speed your getting with a 200. Your recore must have made boat lighter.
[ Post made via Android ]
I am going to be recoring my 87 Valero yt this spring and I'm looking at different materials besides balsa. What is the name of what you used? How has it held up? Did you lay some glass under it or just over. Is it vinyl ester resin or epoxy.
Also I am thinking about changing out the waterlogged foam . Did you do this? That is some serious speed your getting with a 200. Your recore must have made boat lighter.
[ Post made via Android ]
-
- The new guy
- Posts: 4
- Joined: Jul 27, 2021 6:15 pm
- Location: Carnesville georgia
- Contact:
Re: 1986 VKing YT project 99% DONE
Hello . I had this same boat new in 87 . Are you ready to sell ?.
Theo
7064987175
[ Post made via Android ]
Theo
7064987175
[ Post made via Android ]
-
- Random Topics
- Replies
- Views
- Last post
-
- 3Replies
- 54698 Views
- Last post by Hippie459MN
Oct 10, 2021 9:14 am
-
- 3Replies
- 47707 Views
- Last post by Hippie459MN
Oct 29, 2021 9:24 am
-
- 7Replies
- 48433 Views
- Last post by Hippie459MN
Dec 05, 2021 12:14 pm
-
- 4Replies
- 33240 Views
- Last post by Hippie459MN
Nov 02, 2021 5:15 pm
-
- 5Replies
- 21486 Views
- Last post by Hippie459MN
Nov 02, 2021 5:18 pm
Who is online
Users browsing this forum: No registered users and 5 guests