[ Post made via iPhone ]
Welcome to HydrostreamForums.com
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.
Registering only takes a few minutes and you can do so by CLICKING HERE
If you are a member, don't forget to log in to take full advantage of the forum.
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.
Registering only takes a few minutes and you can do so by CLICKING HERE
If you are a member, don't forget to log in to take full advantage of the forum.
83 hydrostream vector
-
BronsonC
- Getting my feet wet
- Posts: 25
- Joined: Sep 04, 2021 7:09 am
- Location: Breaux Bridge, Louisiana
- Been thanked: 13 times
Re: 83 hydrostream vector
No its not waxed but after a few days its not bad to sand, yeah i like the look of the deleted splash well but rather the function of it being there!
[ Post made via iPhone ]
[ Post made via iPhone ]
-
BronsonC
- Getting my feet wet
- Posts: 25
- Joined: Sep 04, 2021 7:09 am
- Location: Breaux Bridge, Louisiana
- Been thanked: 13 times
Re: 83 hydrostream vector
Well, got the hull ready for glass, mixed up some resin and 1/4 inch chopped strand to make a good radius in the pad area. Gunna start under the deck with some 1808 in the morning. Talk about a tight space to work
[ Post made via iPhone ]
- A70D3E52-432A-40D1-87D4-C665DA4E0BB1.jpeg (430.99 KiB) Viewed 143924 times
- 3EBD12EE-84D7-44EA-9FC2-75BB58BF63CB.jpeg (374.49 KiB) Viewed 143924 times
- 422E6694-677D-4213-8F2A-6BDEC7D61267.jpeg (422.1 KiB) Viewed 143924 times
-
BronsonC
- Getting my feet wet
- Posts: 25
- Joined: Sep 04, 2021 7:09 am
- Location: Breaux Bridge, Louisiana
- Been thanked: 13 times
Re: 83 hydrostream vector
- A14F51FC-56B6-4489-B1DA-4E284E7A4D5C.jpeg (444.6 KiB) Viewed 143919 times
[ Post made via iPhone ]BronsonC wrote: ↑Apr 23, 2022 7:20 pm Well, got the hull ready for glass, mixed up some resin and 1/4 inch chopped strand to make a good radius in the pad area. Gunna start under the deck with some 1808 in the morning. Talk about a tight space to work
[ Post made via iPhone ]
-
Hippie459MN
- Site Admin
- Posts: 3992
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 358 times
- Been thanked: 83 times
- Contact:
Re: 83 hydrostream vector
Looking great! 
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
BronsonC
- Getting my feet wet
- Posts: 25
- Joined: Sep 04, 2021 7:09 am
- Location: Breaux Bridge, Louisiana
- Been thanked: 13 times
Re: 83 hydrostream vector
Didnt get a whole lot done lately, almost done laying 1808 threw out the hull. Did manage find me a windshield had to drive to Mississippi and it came with a boat!
[ Post made via iPhone ]
- D3E23CB0-5D63-4CC1-855F-EEF66858011E.jpeg (624.35 KiB) Viewed 142752 times
- F383F4C7-D338-42F8-ABCF-380251627D83.jpeg (726.22 KiB) Viewed 142752 times
-
Hippie459MN
- Site Admin
- Posts: 3992
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 358 times
- Been thanked: 83 times
- Contact:
Re: 83 hydrostream vector
Very nice! Any progress is good progress! That viper looks pretty good. Assuming its rotten like the rest of them though.
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
BronsonC
- Getting my feet wet
- Posts: 25
- Joined: Sep 04, 2021 7:09 am
- Location: Breaux Bridge, Louisiana
- Been thanked: 13 times
Re: 83 hydrostream vector
Back working on the vector, started with core on the wings and going to move to the pad next. I have some spots i need to patch that i sanded out because they looked a lil dry but i think once i patch them the core will bond nicely to the hull. Only problem im seeing so far is that theres a hook on the second set of lifting strakes from the pad, i think from sitting on a crappy trailer with short bunks and rotten core for so long. Looks to be around 3/16 or so deep starting from the back of the boat to about 3ft forward. Core gets layed over that set of strakes so im hoping i can put enough wait on it to get the boat to sit flat on the jig in those areas
[ Post made via iPhone ]
- 85E0DC5E-073C-4C2B-81EB-1719457A61BD.jpeg (654.33 KiB) Viewed 142092 times
- BDA9F32C-5A8F-422F-934B-EE6665154048.jpeg (587.27 KiB) Viewed 142092 times
-
Hippie459MN
- Site Admin
- Posts: 3992
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 358 times
- Been thanked: 83 times
- Contact:
Re: 83 hydrostream vector
Looking great!!! Its coming along nice. 
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- Random Topics
- Replies
- Views
- Last post
-
- 5Replies
- 15339 Views
- Last post by tnelson77
May 19, 2019 2:10 pm
-
- 1Replies
- 18462 Views
- Last post by idvette
Apr 24, 2019 5:13 pm
-
- 3Replies
- 9844 Views
- Last post by AdamDK
May 05, 2019 7:08 am
-
- 6Replies
- 20472 Views
- Last post by tnelson77
May 19, 2019 1:41 pm
-
- 11Replies
- 32943 Views
- Last post by rjdubiel
Aug 21, 2019 10:54 pm