It's been a while since my last update...
Bought all my glassing supplies from UScomposites, 635 thin set epoxy 3:1 Medium 12 gallons (9 resin+3 hardener), 11 lbs. milled fibers, 3 gallon pail of Cab o sil, 25 yd roll of 4" belt 1.5 oz CSM, 25 yd roll of 50" wide 1708.
Corelite board 28lb. density 2- 4x8 sheets 1/2" thick.
6 sheets of 1/2" DivinyCell core material 32"x48", scrim backed and scored.
Not sure exactly how many grinding disks and wheels from Lowes. 36 and 24 grit.
2- Tyvec suits.
Undisclosed amount of Beer...
Got the boat fully gutted and ground out, save for a small area up front I will do before the core goes in. The little dark spots in the hull are leaves that blew in while it was drying out in the sun after a grinding and washing out session.
It's been a while since my last update... :oops:
Bought all my glassing supplies from UScomposites, 635 thin set epoxy 3:1 Medium 12 gallons (9 resin+3 hardener), 11 lbs. milled fibers, 3 gallon pail of Cab o sil, 25 yd roll of 4" belt 1.5 oz CSM, 25 yd roll of 50" wide 1708.
Corelite board 28lb. density 2- 4x8 sheets 1/2" thick.
6 sheets of 1/2" DivinyCell core material 32"x48", scrim backed and scored.
Not sure exactly how many grinding disks and wheels from Lowes. 36 and 24 grit.
2- Tyvec suits.
Undisclosed amount of Beer... :D
Got the boat fully gutted and ground out, save for a small area up front I will do before the core goes in. The little dark spots in the hull are leaves that blew in while it was drying out in the sun after a grinding and washing out session.