Page 1 of 2
AE-21 CANADIAN EDITION
Posted: Aug 31, 2009 5:43 am
by hydrostream76
dunno how long it'll be for sale
my friend sent it to me ..he's interested in it
i already have a project ...
http://toronto.kijiji.ca/c-cars-vehicles-boats-watercraft-powerboats-motorboats-HYDROSTREAM-AE-21-W0QQAdIdZ152321509
looks tight to fix the floor in the back ...
there isn't any videos or many out there ...
anyone have one ?
Re: AE-21 CANADIAN EDITION
Posted: Oct 02, 2009 12:53 pm
by JUPITER VALERO
I just bought a 1991 Canadian Edition AE-21 in great shape. I'll be rerigging the boat soon as the budget allows...They are rare boats but have the same bottom as the HST's so I imagine setup should be comparable on both boats...
Re: AE-21 CANADIAN EDITION
Posted: Oct 02, 2009 8:08 pm
by Vegas XT
This will be my next boat. a AE-21 in on my list. I will have one in 3 years! Gota get through school first!
Re: AE-21 CANADIAN EDITION
Posted: Oct 02, 2009 9:06 pm
by hydrostream76
i like it too
i'd love one
the guy i bought my viper from had one as well.
a red one, with a V8 275 Johnson on the back tweaked to about 300
lol, that motor made a regular 200 look like a 115 V4
he said he had it going 117 mph
Re: AE-21 CANADIAN EDITION
Posted: Aug 28, 2011 11:01 pm
by Bad_Influence
Hi:
Im Charlie ,from Sudbury, Ontario, Canada Im 58 Years Young, must Be mid life Crisis
I couldnt afford a new HydroStream(Canadian Edition) AE-21 in 1989 . I just purchased a 1989 with a
1989 Evinrude 200 XP with a Land and Sea lift and 3 Chopper props
The Hull # is ZJIAE001A989
Re: AE-21 CANADIAN EDITION
Posted: Aug 28, 2011 11:05 pm
by varmint1
Nice Stream and welcome to the forum
Re: AE-21 CANADIAN EDITION
Posted: Aug 29, 2011 9:33 am
by JUPITER VALERO
Bad_Influence wrote:Hi:
Im Charlie ,from Sudbury, Ontario, Canada Im 58 Years Young, must Be mid life Crisis
I couldnt afford a new HydroStream(Canadian Edition) AE-21 in 1989 . I just purchased a 1989 with a
1989 Evinrude 200 XP with a Land and Sea lift and 3 Chopper props
The Hull # is ZJIAE001A989
Wellcome aboard Charlie. Nice looking Ae-21!! How does it run and what kind of speed are you seeing with your setup?? I have a 1991 Canadian Edition AE-21 with a Merc 2.5 liter 200, Offshore Mid section, 12" of setback with a Detwiler hyd. jackplate. Spinning a Tempest Plus 25 I'm already into the 80+ MPH range. I bought a Trophy Plus 27 that should arrive in about a week. Hoping to hit 90MPH!!
Re: AE-21 CANADIAN EDITION
Posted: Aug 29, 2011 9:39 am
by JUPITER VALERO
Re: AE-21 CANADIAN EDITION
Posted: Aug 29, 2011 7:18 pm
by RussF
I like the lines of the AE 21 alot
Re: AE-21 CANADIAN EDITION
Posted: Aug 29, 2011 7:33 pm
by Bad_Influence
JUPITER VALERO wrote:
Wellcome aboard Charlie. Nice looking Ae-21!! How does it run and what kind of speed are you seeing with your setup?? I have a 1991 Canadian Edition AE-21 with a Merc 2.5 liter 200, Offshore Mid section, 12" of setback with a Detwiler hyd. jackplate. Spinning a Tempest Plus 25 I'm already into the 80+ MPH range. I bought a Trophy Plus 27 that should arrive in about a week. Hoping to hit 90MPH!!
Im a real newbee here guys You are going to be my mentor. Do you raise the lift and than trim out OR do you trim out first than rasie the motor vertical Im running a Renegade 4 blade prop but I havent used a GPS yet On the old medallion speedometer I have reached 75 mph at 6,000 rpms