Hydrostreamforums.com - The only dedicated Hydrostream forum

looking good ......................but I don't understand the pipe part.........................

RussF wrote:looking good ......................but I don't understand the pipe part.........................

The pipe transfers water from the pickup to the water pump on the gearcase. I don't have a good picture with all the holes drilled.

its taken the place of the tube ........................

Did you buy that cone from bobs and what one did you get and how much? I am going to just bite the bullet and buy a new cone as well and replace that one that is on my lower I have now.

Looking awesome. I figure in about 2-3 weeks I should be able to get going on mine so if ya have any free time... lol

Is your pickup through the hull?

threw the hull ......WHAT the HULL is that..... ....................AND you didn 't do the ROLL CALL....................

Hippie459MN wrote:Did you buy that cone from bobs and what one did you get and how much? I am going to just bite the bullet and buy a new cone as well and replace that one that is on my lower I have now.

Looking awesome. I figure in about 2-3 weeks I should be able to get going on mine so if ya have any free time... lol

I used the top one. http://bobsmachine.com/Products/Nose_Cone_Bigfoot.cfm

I could come up for a good long day, just let me know when

RussF wrote:threw the hull ......WHAT the HULL is that.....

You Know what I mean! Maybe it will get cut shorter to elbow to the top of the nosecone......just asking. But you're right I guess there's no hull in the water

Russ, I was the third one checking in.

The pickup is still on the case. If you look at the like I just put up you will see the hose and the fitting in the nosecone, since I shortened it I cut that part off. You can see in this picture, the water runs up the front of the casting.

77viper wrote:I used the top one. http://bobsmachine.com/Products/Nose_Cone_Bigfoot.cfm

I could come up for a good long day, just let me know when

Will do.

That Big Foot one is the one I was looking at also. I didnt know if they have different ones for OMCs or not but doesnt look like it.