Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
‘89 HST interior build
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
‘89 HST interior build
I decided to re-upholster my HST interior and make it a little more modern.
One thing that didn’t make sense was the rear hatch. If your HST had the stripes that go over the rear deck, those colors didn’t carry onto the hatch upholstery.
The stripe that runs down the center of the seats carried thru down the middle of the hatch lengthwise.
My plan is to leave the vinyl flat and mimicking the deck theme on the hatch only making it fit that theme.
The seats and side panels will get a tuck-n- roll style stitching that will resemble my Virage design.
Below is an example of a rear hatch with a center stripe that doesn’t look right to me.
[ Post made via iPhone ]
One thing that didn’t make sense was the rear hatch. If your HST had the stripes that go over the rear deck, those colors didn’t carry onto the hatch upholstery.
The stripe that runs down the center of the seats carried thru down the middle of the hatch lengthwise.
My plan is to leave the vinyl flat and mimicking the deck theme on the hatch only making it fit that theme.
The seats and side panels will get a tuck-n- roll style stitching that will resemble my Virage design.
Below is an example of a rear hatch with a center stripe that doesn’t look right to me.
[ Post made via iPhone ]
- Attachments
-
- 2F001CE4-613B-45B2-B50F-27B6DC11AD1D.png (962.85 KiB) Viewed 9840 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST interior build
I replaced the foam and drew out the design on the foam. It should look like the Virage interior if I can pull it off.
[ Post made via iPhone ]
[ Post made via iPhone ]
- Attachments
-
- 46109B9D-031F-49E5-A57D-F237533F234A.jpeg (123 KiB) Viewed 9839 times
-
- 4694F935-685D-4FCD-BC80-CA2298641605.jpeg (117.58 KiB) Viewed 9839 times
-
- 20F667C5-C4FB-4DE1-B547-71D627492DFF.jpeg (116.85 KiB) Viewed 9839 times
-
- F65EFE4F-385F-4693-85FC-50DDE753C299.jpeg (307.67 KiB) Viewed 9839 times
-
- 62749843-173C-4D3F-9BD6-5AB02ABABED1.jpeg (263.65 KiB) Viewed 9839 times
-
- CA8EEB71-2E0B-47FC-AA50-34C4062A702A.jpeg (327.82 KiB) Viewed 9839 times
-
- EF0C695B-19B1-47B0-AE40-EE0B0BDF0D33.jpeg (291.87 KiB) Viewed 9839 times
-
- 2883FC3F-03EC-4606-A02F-94EBE5A38427.jpeg (335.98 KiB) Viewed 9839 times
-
- 2407D356-5691-4D83-9A43-5C9E24491EC0.jpeg (364.53 KiB) Viewed 9839 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST interior build
Rear hatch is done. Blends in well with the rear deck.
[ Post made via iPhone ]
[ Post made via iPhone ]
- Attachments
-
- A3CCCEDB-CD3C-491B-9A2B-244A96996820.jpeg (327.49 KiB) Viewed 9830 times
-
- 7ACB1CDC-6488-416B-A3FE-DFD52D4A12DE.jpeg (290.86 KiB) Viewed 9830 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST interior build
I’ve been staying busy making patterns, gluing vinyl to 1/2” sew foam, sewing colored strips together to form the stripes and fitting each panel to the frames to make sure they will fit nice and tight.
My local embroidery lady is closed till April. We worked together to get the Hydrostream font just right.
I found a home run embroidery place 30 minutes away and she can do my panels right away.
I’m going to just have “HST” put on the panels.
It takes a lot of pieces to put together a multi striped interior.
[ Post made via iPhone ]
My local embroidery lady is closed till April. We worked together to get the Hydrostream font just right.
I found a home run embroidery place 30 minutes away and she can do my panels right away.
I’m going to just have “HST” put on the panels.
It takes a lot of pieces to put together a multi striped interior.
[ Post made via iPhone ]
- Attachments
-
- 75DAFB05-E614-4312-83BB-D44EB0EF52C4.jpeg (310.28 KiB) Viewed 9800 times
-
- A1475A0B-0586-444E-8E27-278C04D23E2B.jpeg (336.89 KiB) Viewed 9800 times
-
- CE29CCE3-C5AB-4A16-AAEF-C4756089542D.jpeg (363.18 KiB) Viewed 9800 times
-
- FA08FEB7-B6EB-42D2-8AA0-CC3414DC9504.jpeg (312.2 KiB) Viewed 9800 times
-
- D8AE72EA-3B0C-4FAF-9B44-84CB5315AEE4.jpeg (322.65 KiB) Viewed 9800 times
-
- AD6A15DF-1BDE-43AF-A51D-3CEECD290EEA.jpeg (315.48 KiB) Viewed 9800 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST interior build
Rear seat bottom cushion and side panels are done.
Lots of pieces needed to make a panel.
[ Post made via iPhone ]
Lots of pieces needed to make a panel.
[ Post made via iPhone ]
- Attachments
-
- FDCFCA26-940B-40FF-8464-6DBD19303E1D.jpeg (302.24 KiB) Viewed 9768 times
-
- 530DB4AA-5401-4874-96D4-7A73A231696A.jpeg (263.11 KiB) Viewed 9768 times
-
- 0F1B170A-7EC3-40F7-9F26-D0C6C0EC2EE9.jpeg (384.02 KiB) Viewed 9768 times
-
- 47F7E663-EE82-4309-B036-C034BD4BA2B5.jpeg (279.24 KiB) Viewed 9768 times
-
- 3E7E6776-1D32-4288-BC70-A1853AAC49A5.jpeg (239.23 KiB) Viewed 9768 times
-
- F7C93D48-D5EC-47DD-A1B5-BB983F44B1B9.jpeg (389.65 KiB) Viewed 9768 times
-
- F81230B8-31EA-4496-B840-6138B92DF4D4.jpeg (381.91 KiB) Viewed 9768 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST interior build
Got all the sewing done and installed.
Everything was looking great until the front buckets.
The foam on the shell goes beyond the fiberglass edge by up to 1-1/2” beyond.
Even with firm foam, it can’t hold the sewn together pleats straight.
I removed the pleaded panel from the arm band and started some tricks to relieve some tension. The panel is sitting in place now without curling up. I’ll sew it back tomorrow and see how it looks.
[ Post made via iPhone ]
Everything was looking great until the front buckets.
The foam on the shell goes beyond the fiberglass edge by up to 1-1/2” beyond.
Even with firm foam, it can’t hold the sewn together pleats straight.
I removed the pleaded panel from the arm band and started some tricks to relieve some tension. The panel is sitting in place now without curling up. I’ll sew it back tomorrow and see how it looks.
[ Post made via iPhone ]
- Attachments
-
- A0ABDB00-FDA8-4870-8E92-EE36D3EEE5E9.jpeg (108.59 KiB) Viewed 9703 times
-
- 644AD04A-2BE8-4129-A3C4-B0B10F4556F3.jpeg (120.06 KiB) Viewed 9703 times
-
- 897347AC-7557-45A0-A5E3-CB58D27B75A2.jpeg (119.18 KiB) Viewed 9703 times
-
- 35F7B4FC-E6A5-4824-BC70-F7F0519A1F26.jpeg (105.18 KiB) Viewed 9703 times
-
- 8CF717E0-FB85-417B-A516-BA08C31FF53B.jpeg (106.91 KiB) Viewed 9703 times
-
- 2530F00F-91BE-47FB-9D63-400333690A1B.jpeg (107.59 KiB) Viewed 9703 times
-
- C3B6F6B3-C842-4949-85B9-08A38C64DA0D.jpeg (87.66 KiB) Viewed 9703 times
-
- 609E97A1-8EA1-498F-A9CD-DA2C7B955092.jpeg (112.57 KiB) Viewed 9703 times
-
- 48F718DC-97E1-452A-9020-96E6192EBBDC.jpeg (77.21 KiB) Viewed 9703 times
-
- ACF5972C-7BA6-454E-A58F-C276E7253B68.jpeg (125.85 KiB) Viewed 9703 times
-
- 834332DC-D4B9-4753-8B74-826C80288EFB.jpeg (128.27 KiB) Viewed 9703 times
-
- 9F77DAC7-4DFF-4CBC-81F5-05FC045A2F76.jpeg (85.39 KiB) Viewed 9703 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST interior build
I’m thinking it was the bulk at the piping AND that I sewed the piping on the arm band THEN sewed the pleated panel to that which caused the issues.
Here’s the comparison.
Now to tear down the other seat.
[ Post made via iPhone ]
Here’s the comparison.
Now to tear down the other seat.
[ Post made via iPhone ]
- Attachments
-
- ADA7A468-7C6F-4306-9DDD-FCECCFD5DE1A.jpeg (123.83 KiB) Viewed 9693 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST interior build
And that’s a wrap!!
8 hours to fix the oops..
[ Post made via iPhone ]
8 hours to fix the oops..
[ Post made via iPhone ]
- Attachments
-
- C56CD9D2-7898-4618-AED7-187DD03F0099.jpeg (378.25 KiB) Viewed 9688 times
-
- FA7DE813-4395-4B89-834F-8BD2A18AA24B.jpeg (343.37 KiB) Viewed 9688 times
-
- 52A8128C-1A74-4DDD-AAC1-AA596B8D819B.jpeg (282.52 KiB) Viewed 9688 times
-
- CD87C90F-BBFE-4929-A487-757DAA403F9E.jpeg (338.44 KiB) Viewed 9688 times
-
- 0DD45B63-ED49-45E1-BF1D-FF9910A837E3.jpeg (392 KiB) Viewed 9688 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Site Admin
- Posts: 3974
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 350 times
- Been thanked: 82 times
- Contact:
Re: ‘89 HST interior build
Looks awesome! You make it look easy!
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: ‘89 HST interior build
Well, the more I do, the easier it gets.
I was getting ready to mount the front seats and “woah!!!” The ski locker hatch won’t come out!!
The seats are 1” off the floor ( Factory height).
The only way it could have been removed would be to slide forward. The rear seat base is too close to go back and rise to get over the front edge of the cushion.
The problem is that the hatch is 3/4” slats with 3/4” cross bracing. It wouldn’t lift high enough to clear the hatch opening frame ring.
I don’t see how this would have ever worked from the factory unless the seats were mounted higher.
Caprice asked if I could cut the hatch into thirds and put piano hinges at the joints.
It was a sound idea and I broke out the chop saw and sectioned it.
Works like a charm!!!
Lift the rear portion up and slide back, lift again and it slides all the way out!!!
[ Post made via iPhone ]
I was getting ready to mount the front seats and “woah!!!” The ski locker hatch won’t come out!!
The seats are 1” off the floor ( Factory height).
The only way it could have been removed would be to slide forward. The rear seat base is too close to go back and rise to get over the front edge of the cushion.
The problem is that the hatch is 3/4” slats with 3/4” cross bracing. It wouldn’t lift high enough to clear the hatch opening frame ring.
I don’t see how this would have ever worked from the factory unless the seats were mounted higher.
Caprice asked if I could cut the hatch into thirds and put piano hinges at the joints.
It was a sound idea and I broke out the chop saw and sectioned it.
Works like a charm!!!
Lift the rear portion up and slide back, lift again and it slides all the way out!!!
[ Post made via iPhone ]
- Attachments
-
- 095E3943-3043-4F91-97D9-F39631A8533D.jpeg (453.61 KiB) Viewed 9583 times
-
- 41ABAAA6-119C-47DA-8FBD-62E9DF592BCA.jpeg (346.01 KiB) Viewed 9583 times
-
- C5470054-E540-41B7-87EB-6BC5A9154548.jpeg (355.12 KiB) Viewed 9583 times
-
- FEA3BF83-B97B-4871-ABDD-104BDE85C1EA.jpeg (314.36 KiB) Viewed 9583 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Random Topics
- Replies
- Views
- Last post
-
- 8Replies
- 5895 Views
- Last post by king gill
Oct 29, 2009 8:26 am
-
- 33Replies
- 10506 Views
- Last post by Hippie459MN
Jun 24, 2010 7:24 pm
-
- 1Replies
- 2881 Views
- Last post by transomstand
Sep 16, 2009 11:38 am
-
- 11Replies
- 7253 Views
- Last post by ccrick
Oct 28, 2009 10:59 pm
-
- 4Replies
- 6034 Views
- Last post by Hippie459MN
Sep 17, 2009 9:30 am
Who is online
Users browsing this forum: No registered users and 2 guests