Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
Building interior from scratch
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: Building interior from scratch
Got my 1/4” staples so I could assemble the side panels.
Turned out great.
[ Post made via iPhone ]
Turned out great.
[ Post made via iPhone ]
- Attachments
-
- DF59541F-3958-4CA1-B1BE-80C22127D0F7.jpeg (69.91 KiB) Viewed 25319 times
-
- C2E61BC4-4AA4-4D70-A023-A83290E45017.jpeg (103.99 KiB) Viewed 25319 times
-
- 64A09D58-E809-4712-9DA2-FA3A3FBB2779.jpeg (104.06 KiB) Viewed 25319 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: Building interior from scratch
Puttering away still.
Working on the rear seat bottom. Getting the stitch lines to align is time consuming.
I need to get some “pull fabric “ before I can install the cover.
This is a non stretch fabric that pulls the bolster down to the base.
I loosely slipped the cover on and am happy at the initial fit.
The steamer is coming down from Alaska so the wrinkle in the armrest should come out. ( in case you noticed it).
[ Post made via iPhone ]
Working on the rear seat bottom. Getting the stitch lines to align is time consuming.
I need to get some “pull fabric “ before I can install the cover.
This is a non stretch fabric that pulls the bolster down to the base.
I loosely slipped the cover on and am happy at the initial fit.
The steamer is coming down from Alaska so the wrinkle in the armrest should come out. ( in case you noticed it).
[ Post made via iPhone ]
- Attachments
-
- 6051A4B7-73A0-4726-AFF5-1E1CA80E2783.jpeg (81.54 KiB) Viewed 25314 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Site Admin
- Posts: 3974
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 350 times
- Been thanked: 82 times
- Contact:
Re: Building interior from scratch
Wow! Looking great Ron! I should send you a few seats. lol
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- Regular
- Posts: 106
- Joined: Aug 01, 2018 11:05 am
- Location: Minneapolis Minnesota
- Has thanked: 151 times
- Been thanked: 50 times
- Contact:
Re: Building interior from scratch
Dang Ron. You're really starting to tempt me into doing mine now. I'm starting to loose confidence that the shop I initially talked to will complete mine in time.
'78 Viking/ '98 Mercury 225 ProMax
500+ pictures of build: https://www.flickr.com/photos/152974368@N02/albums/72157708863869223
Videos of build: https://www.youtube.com/channel/UCWRAfGZVq4a3R-W7JdJeFeQ/videos?view_as=subscriber
500+ pictures of build: https://www.flickr.com/photos/152974368@N02/albums/72157708863869223
Videos of build: https://www.youtube.com/channel/UCWRAfGZVq4a3R-W7JdJeFeQ/videos?view_as=subscriber
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: Building interior from scratch
Haa! I wish I could help everyone out. Truly!!
It’s very rewarding but I’m slow.
Got the rear seat bottom fitted.
Going to finish the back side of the backrest next.
Finish stapling, trim edge, put on white screen material and “hide-em” to cover staples.
[ Post made via iPhone ]
It’s very rewarding but I’m slow.
Got the rear seat bottom fitted.
Going to finish the back side of the backrest next.
Finish stapling, trim edge, put on white screen material and “hide-em” to cover staples.
[ Post made via iPhone ]
- Attachments
-
- 87DA1250-A533-452F-BDA2-BE70E4C8156E.jpeg (49.77 KiB) Viewed 25306 times
-
- 567784FD-898A-431C-979F-31339DF2B095.jpeg (91.11 KiB) Viewed 25306 times
-
- 22458443-489B-4321-A327-73146C67D972.jpeg (78.25 KiB) Viewed 25306 times
-
- D54C2C4F-4336-4B96-B6BD-9B9D7BBBA248.jpeg (98.28 KiB) Viewed 25306 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Site Admin
- Posts: 3974
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 350 times
- Been thanked: 82 times
- Contact:
Re: Building interior from scratch
That looks great Ron! Im with Tony. I might have to try my hand at doing my own.
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: Building interior from scratch
Thanks guys! I really appreciate it.
Here’s the back trimmed out. Really cleans up the back when the rear hatch is open.
[ Post made via iPhone ]
Here’s the back trimmed out. Really cleans up the back when the rear hatch is open.
[ Post made via iPhone ]
- Attachments
-
- F1979322-E40D-48EE-B589-C644442D9F3D.jpeg (87.12 KiB) Viewed 25304 times
-
- 7306FD5C-F354-4CDA-AB33-FACE4D92EA83.jpeg (95.65 KiB) Viewed 25304 times
-
- 444E0C24-4365-432B-8D95-51743E7A0328.jpeg (90.99 KiB) Viewed 25304 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: Building interior from scratch
I spent the day making windlace to run the perimeter of the side panels. And stitching up the rear hatch area.
I can’t staple it till I get the rear side panels on then rear seat set in. THEN I can align the stitching.
I didn’t think about the bulk when folding the edges.
When I drilled the panels for the clips, I had the bare wood against the boat. Now with the extra material. ( bow side panels), the push pins won't align . I’m going to cut them off and put in rivet nuts with studs. Then I can slot the holes in the fiberglass and use nuts.
[ Post made via iPhone ]
I can’t staple it till I get the rear side panels on then rear seat set in. THEN I can align the stitching.
I didn’t think about the bulk when folding the edges.
When I drilled the panels for the clips, I had the bare wood against the boat. Now with the extra material. ( bow side panels), the push pins won't align . I’m going to cut them off and put in rivet nuts with studs. Then I can slot the holes in the fiberglass and use nuts.
[ Post made via iPhone ]
- Attachments
-
- E2AA2EED-7E1E-4D4F-B167-4EC6885F6DD1.jpeg (65.89 KiB) Viewed 25301 times
-
- 46BB2A83-61D2-4F10-91A1-A2E7F5BA2ACC.jpeg (69.34 KiB) Viewed 25301 times
-
- 764ACB64-7DDB-4A4C-9B16-CC97F1EB3D2C.jpeg (82.79 KiB) Viewed 25301 times
-
- D269324C-6783-42DA-A2D1-B8ABB57FEABE.jpeg (73.2 KiB) Viewed 25301 times
-
- DF386AE2-A01F-48A4-8C4F-687232227445.jpeg (97.85 KiB) Viewed 25301 times
-
- 4C0D88A0-D994-4B91-B29B-104E9ABF72DB.jpeg (80.06 KiB) Viewed 25301 times
-
- 5CB3E12F-2D10-4F83-AC2B-DBCB45671C7B.jpeg (71.26 KiB) Viewed 25301 times
-
- A87419EF-EF94-4EC5-90F9-EBB0BCD91B08.jpeg (58.16 KiB) Viewed 25301 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: Building interior from scratch
This is 8 hours work.
Front buckets-
Building center section first working outward.
[ Post made via iPhone ]
Front buckets-
Building center section first working outward.
[ Post made via iPhone ]
- Attachments
-
- EE0DE402-00D7-420E-9A9F-A2004EB287D9.jpeg (76.15 KiB) Viewed 25297 times
-
- 6A1FF398-8236-439A-8E81-474426642647.jpeg (82.98 KiB) Viewed 25297 times
-
- E19A7A78-0482-459C-8144-CAD8DBAFD249.jpeg (63.05 KiB) Viewed 25297 times
-
- DC84273D-E720-4124-B8ED-162DB2A3A91F.jpeg (63.47 KiB) Viewed 25297 times
-
- F7087391-BAE6-40D7-A02E-2732C4F633A7.jpeg (72.44 KiB) Viewed 25297 times
-
- 35E33B1A-5512-4B9A-8048-A754BF19770F.jpeg (67.56 KiB) Viewed 25297 times
-
- 0A797DDB-460C-4FD1-9CB3-22A82CE4E375.jpeg (63.14 KiB) Viewed 25297 times
-
- 1DE7C619-F717-42AB-91F0-96A944B6FB11.jpeg (67.18 KiB) Viewed 25297 times
-
- BE68BFAC-B41C-4B57-AFED-8154C7402E13.jpeg (84.88 KiB) Viewed 25297 times
-
- FD176336-2004-44D4-B97D-070E78C80801.jpeg (83.85 KiB) Viewed 25297 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Hydrostream know it all
- Posts: 512
- Joined: Feb 10, 2012 8:01 pm
- Location: Sitka Alaska / Okanogan,WA
- Has thanked: 5 times
- Been thanked: 158 times
- Contact:
Re: Building interior from scratch
Got the covers on the front seat shells. Overall not a bad fit.
I’ll get the steamer fired up and see if I can work out some of the wrinkles.
[ Post made via iPhone ]
I’ll get the steamer fired up and see if I can work out some of the wrinkles.
[ Post made via iPhone ]
- Attachments
-
- 1717E365-3055-498C-9060-5A5A7B9973F9.jpeg (79.26 KiB) Viewed 25293 times
Ron Pratt
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
Okanogan, WA
Viper/ 2.5L 200 Merc (SOLD)
1991 "the last" Virage/ 15" 280
2003 9’ Mini Virage/ 15 hp Honda 4-stroke
1989 Voyager/ 300 Promax
1989 HST / 2.5L 200 Merc
http://www.prattcustoms.com
-
- Random Topics
- Replies
- Views
- Last post
-
- 10Replies
- 18027 Views
- Last post by LSaupe
Mar 31, 2013 5:19 am
-
- 2Replies
- 8230 Views
- Last post by Hippie459MN
Mar 13, 2013 2:00 pm
-
- 1Replies
- 4501 Views
- Last post by V pads
Mar 13, 2013 8:32 pm
-
- 9Replies
- 9792 Views
- Last post by XcellR8
Mar 14, 2013 6:56 pm
-
- 3Replies
- 8156 Views
- Last post by XcellR8
Mar 17, 2013 8:06 am
Who is online
Users browsing this forum: No registered users and 2 guests