Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
Vking windshield mounting
-
- Hydrostream Addict
- Posts: 418
- Joined: Jun 22, 2010 5:22 pm
- Location: hohenwald, tn
- Contact:
Re: Vking windshield mounting
would post oic but all i got is iphone no computer to downsize maybe hippie or ydoc probally got a pic if it or go to my profile http://www.hydrostreamforums.com/viewtopic.php?f=13&t=2313 this has pics of windshield on my comp vking
[ Post made via iPhone ]
[ Post made via iPhone ]
79 vector missing in action!!!!!
2006 vking center steer
2006 vking center steer
-
- Getting my feet wet
- Posts: 64
- Joined: Sep 24, 2013 6:38 pm
- Location: kettering ohio
- Contact:
Vking windshield mounting
weather warming here in ohio maybe slide over to storage garage & get a few shots. gary
- Attachments
-
- hydrostream.jpg (884.39 KiB) Viewed 7677 times
Last edited by mitchielpricer on Jul 27, 2016 7:37 pm, edited 1 time in total.
Re: Vking windshield mounting
Do you run it without a top rail? If so, how fast?265mercman wrote:would post oic but all i got is iphone no computer to downsize maybe hippie or ydoc probally got a pic if it or go to my profile http://www.hydrostreamforums.com/viewtopic.php?f=13&t=2313 this has pics of windshield on my comp vking
[ Post made via iPhone ]
-
- HSF Lifetime Supporter
- Posts: 901
- Joined: Apr 11, 2010 12:57 pm
- Location: beaumont, tx
- Has thanked: 23 times
- Been thanked: 5 times
- Contact:
Re: Vking windshield mounting
Stephens boat is slow!! 45 maybe 50 mph
[ Post made via Android ]
[ Post made via Android ]
81 vector....complete restore....1991 7 pedal 200 slightly modded
ALWAYS under construction
HYDROSTREAM HELLIONS
https://www.youtube.com/watch?v=YHE8wWZsFpw
ALWAYS under construction
HYDROSTREAM HELLIONS
https://www.youtube.com/watch?v=YHE8wWZsFpw
-
- Getting my feet wet
- Posts: 64
- Joined: Sep 24, 2013 6:38 pm
- Location: kettering ohio
- Contact:
Re: Vking windshield mounting
BQUICK wrote: Do you run it without a top rail? If so, how fast?
got top rail on prep-etch primered sprayed silver base flake clear coat on rail / windshield is the gell coat black .dont know about the test havent has it out sense instaled. gary
-
- Hydrostream Addict
- Posts: 418
- Joined: Jun 22, 2010 5:22 pm
- Location: hohenwald, tn
- Contact:
Re: Vking windshield mounting
lmao ydoc yea 45-50 at idle lmao iam running gps 94 rite now no top rail and building a new motir as we speak hopefully turn 108 gps and it still want need a top rail
[ Post made via iPhone ]
[ Post made via iPhone ]
79 vector missing in action!!!!!
2006 vking center steer
2006 vking center steer
Re: Vking windshield mounting
What bolts did y’all use for the front bottom mounts?
[ Post made via iPhone ]
[ Post made via iPhone ]
-
- Moderator
- Posts: 327
- Joined: Jul 19, 2016 6:58 pm
- Location: Oshawa, Ontario (near Toronto)
- Has thanked: 45 times
- Been thanked: 72 times
- Contact:
Re: Vking windshield mounting
I haven't bolted mine on yet, but i took some measurements.
The acrylic windscreen is 3/16" thick.
The lower trim rail is 1/8" thick.
I would venture a guess that the fiberglass thickness of the deck is roughly 3/16" thick. (I added some layers of 1.5oz CSM and 1708 glass to the underside. Let's be generous and say 1/4" thick max)
That puts the total thickness of all 3 at 9/16". Add in extra bolt length for the nut.
You could probably use 1" long machine screws.
The holes drilled into my windshield and lower trim are 1/4" diameter.
.
You should be looking at using #10 (3/16) or #12 (7/32) machine screws.
#8's (5/32) might allow for a little more play when trying to line up the holes if your deck is also drilled.
The acrylic windscreen is 3/16" thick.
The lower trim rail is 1/8" thick.
I would venture a guess that the fiberglass thickness of the deck is roughly 3/16" thick. (I added some layers of 1.5oz CSM and 1708 glass to the underside. Let's be generous and say 1/4" thick max)
That puts the total thickness of all 3 at 9/16". Add in extra bolt length for the nut.
You could probably use 1" long machine screws.
The holes drilled into my windshield and lower trim are 1/4" diameter.
.
You should be looking at using #10 (3/16) or #12 (7/32) machine screws.
#8's (5/32) might allow for a little more play when trying to line up the holes if your deck is also drilled.
-
- Random Topics
- Replies
- Views
- Last post
-
- 5Replies
- 78441 Views
- Last post by Hippie459MN
Mar 10, 2022 10:00 pm
-
- 3Replies
- 95761 Views
- Last post by Hippie459MN
Mar 10, 2022 10:03 pm
-
- 5Replies
- 117337 Views
- Last post by Hippie459MN
Mar 25, 2022 2:11 pm
-
- 1Replies
- 118059 Views
- Last post by mickey12
May 20, 2022 1:33 pm
-
- 2Replies
- 124270 Views
- Last post by Hydrostream Bot
May 22, 2022 8:09 am
Who is online
Users browsing this forum: No registered users and 56 guests