Viper rebuild

[YDOC462]

MAN EVERYTHING YOUR DOING LOOKS GREAT! IM TAKING NOTES!

[proprider]

Thanks Cody! Looking forward to getting all the rigging set up. I can almost begin to see the light at the end of the tunnel.... won't be long before things start thawing out.

[265mercman]

great job ur doing on it gona be beautiful when its done after this summer iam gona start on redoing my top of my 06 u gona paint or done any research on wraps iam still debating

[ Post made via iPhone ]

[Sonik]

Lookin' good. Might have to head thattaway and poke around a bit for some ideas!

[proprider]

great job ur doing on it gona be beautiful when its done after this summer iam gona start on redoing my top of my 06 u gona paint or done any research on wraps iam still debating

[ Post made via iPhone ]

Thanks mercman! I'm going to be painting the boat similar to my racing hydro, white and orange with gold pearl.

[proprider]

Lookin' good. Might have to head thattaway and poke around a bit for some ideas!

Jeff, your welcome to come poke around anytime.

[p man]

This is a great looking rebuild
Can't wait to see it complete.

[265mercman]

yea i got a couple bad spots in my top coat its 7 yrs old good paint man could probally fix them and no one would ever know 3 spots bout 1/4 to 1/2 dollar size

[ Post made via iPhone ]

[proprider]

Drilled my first virgin..........transom that is. When the mounting holes were laid out, they were raised 1.5" higher than the original stock positions. This was done so that there would be plenty of "above the pad" travel. There is 4-7/8th inches of travel in the jackplate, pretty sure there is alot of room there for dailing-in.

[proprider]

Used some leftover plywood to fab a battery tray/hold down for the Optima battery. Glassed in some wing plates so the battery can be bolted to the stringers, that will be supporting it.