Hippie feel free to move this if you want,
I thought I would post how to remove the oil pump and install a block off plate.
First thing to do is fill your fuel tank and add oil, doing this ensures you will have oil in the event you get distracted.
Next I removed the oil tank from the boat. The oil pump will come off so that line can stay off but you will need to plug the fitting on the STBD side of the block if not it will suck air and run lean enough to burn the cyl down. I didn't take pictures of that.
Next remove the onboard oil tank and cap.
Next is the oil pump sensor at this point remove the philips ground screw you will be removing all the grounds under it.
As long as your at it might as well remove the oil pump modual shown here.
You will need to remove the green wire from the outer powre pack.
At this time you can take the oil pump arm off the carb linkage and pull the pump, plasitc adapter piece and metal pick up as well as the shaft.
This is the block off plug,I will get the part # But there are 2 a short one and a long one use the long one it holds a bushing in place.
The flat part goes twords the crankshaft. They are 8-32 x1/4 screws or bolts that hold the plate in. They are available at a hardware stoor.
This is it all off.
If I forgot something feel free to add to this, it was a while ago I did it.
Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
mercury oil pump removal
-
- HSF Supporting Vendor
- Posts: 1989
- Joined: Mar 29, 2009 11:38 pm
- Location: montgomery MN
- Contact:
mercury oil pump removal
Samari on s&f
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
-
- Random Topics
- Replies
- Views
- Last post
-
- 2Replies
- 7236 Views
- Last post by Djaws24
Jul 04, 2018 5:31 pm
-
- 7Replies
- 10520 Views
- Last post by Hippie459MN
Jul 05, 2018 8:47 am
-
- 14Replies
- 23412 Views
- Last post by msethsmile+
Aug 21, 2019 3:30 pm
-
-
New to Hydrostream, so thought I would join forum and network a bit!
Last post by tonymancil « Jul 07, 2018 12:24 am - 2Replies
- 6069 Views
- Last post by AdamDK
Jul 07, 2018 5:59 am
-
-
- 4Replies
- 5586 Views
- Last post by AdamDK
Jul 18, 2018 7:44 pm
Who is online
Users browsing this forum: No registered users and 2 guests