Welcome to HydrostreamForums.com
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.
Registering only takes a few minutes and you can do so by CLICKING HERE
If you are a member, don't forget to log in to take full advantage of the forum.
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.
Registering only takes a few minutes and you can do so by CLICKING HERE
If you are a member, don't forget to log in to take full advantage of the forum.
AE-21 CANADIAN EDITION
-
- Regular
- Posts: 147
- Joined: Aug 12, 2009 6:33 am
- Location: Toronto, Ontario Canada
AE-21 CANADIAN EDITION
dunno how long it'll be for sale
my friend sent it to me ..he's interested in it
i already have a project ...
http://toronto.kijiji.ca/c-cars-vehicles-boats-watercraft-powerboats-motorboats-HYDROSTREAM-AE-21-W0QQAdIdZ152321509
looks tight to fix the floor in the back ...
there isn't any videos or many out there ...
anyone have one ?
my friend sent it to me ..he's interested in it
i already have a project ...
http://toronto.kijiji.ca/c-cars-vehicles-boats-watercraft-powerboats-motorboats-HYDROSTREAM-AE-21-W0QQAdIdZ152321509
looks tight to fix the floor in the back ...
there isn't any videos or many out there ...
anyone have one ?
-
- Regular
- Posts: 127
- Joined: May 23, 2009 3:57 pm
- Location: Jupiter, FL
Re: AE-21 CANADIAN EDITION
I just bought a 1991 Canadian Edition AE-21 in great shape. I'll be rerigging the boat soon as the budget allows...They are rare boats but have the same bottom as the HST's so I imagine setup should be comparable on both boats...
1991 Canadian Edition AE-21/Merc 2.5
1997 Checkmate Pulsare 2100/under the knife
1994 Checkmate Pulsare 2100/Merc 225Xri-SOLD
1988 Valero YT Bowrider/Merc 175-SOLD
1997 Checkmate Pulsare 2100/under the knife
1994 Checkmate Pulsare 2100/Merc 225Xri-SOLD
1988 Valero YT Bowrider/Merc 175-SOLD
Re: AE-21 CANADIAN EDITION
This will be my next boat. a AE-21 in on my list. I will have one in 3 years! Gota get through school first!
1990 Vegas XT 1997 225 Mariner Supermag
http://www.youtube.com/watch?v=9xkEQjMPJbM
http://www.youtube.com/watch?v=y-_sgtIOeoo
http://www.youtube.com/watch?v=9xkEQjMPJbM
http://www.youtube.com/watch?v=y-_sgtIOeoo
-
- Regular
- Posts: 147
- Joined: Aug 12, 2009 6:33 am
- Location: Toronto, Ontario Canada
Re: AE-21 CANADIAN EDITION
i like it too
i'd love one
the guy i bought my viper from had one as well.
a red one, with a V8 275 Johnson on the back tweaked to about 300
lol, that motor made a regular 200 look like a 115 V4
he said he had it going 117 mph
i'd love one
the guy i bought my viper from had one as well.
a red one, with a V8 275 Johnson on the back tweaked to about 300
lol, that motor made a regular 200 look like a 115 V4
he said he had it going 117 mph
-
- The new guy
- Posts: 9
- Joined: Aug 16, 2011 12:20 pm
- Location: Northern, Ontario,Canada
Re: AE-21 CANADIAN EDITION
Hi:
Im Charlie ,from Sudbury, Ontario, Canada Im 58 Years Young, must Be mid life Crisis
I couldnt afford a new HydroStream(Canadian Edition) AE-21 in 1989 . I just purchased a 1989 with a
1989 Evinrude 200 XP with a Land and Sea lift and 3 Chopper props
The Hull # is ZJIAE001A989
Im Charlie ,from Sudbury, Ontario, Canada Im 58 Years Young, must Be mid life Crisis
I couldnt afford a new HydroStream(Canadian Edition) AE-21 in 1989 . I just purchased a 1989 with a
1989 Evinrude 200 XP with a Land and Sea lift and 3 Chopper props
The Hull # is ZJIAE001A989
- Attachments
-
- IMG_0.JPG (98.75 KiB) Viewed 9893 times
Re: AE-21 CANADIAN EDITION
Nice Stream and welcome to the forum
81 Varmint 2.5 Mag 3
82 Vandal Merc 85
76 Viper Merc 150
84 Valero
82 Vandal Merc 85
76 Viper Merc 150
84 Valero
-
- Regular
- Posts: 127
- Joined: May 23, 2009 3:57 pm
- Location: Jupiter, FL
Re: AE-21 CANADIAN EDITION
Bad_Influence wrote:Hi:
Im Charlie ,from Sudbury, Ontario, Canada Im 58 Years Young, must Be mid life Crisis
I couldnt afford a new HydroStream(Canadian Edition) AE-21 in 1989 . I just purchased a 1989 with a
1989 Evinrude 200 XP with a Land and Sea lift and 3 Chopper props
The Hull # is ZJIAE001A989
Wellcome aboard Charlie. Nice looking Ae-21!! How does it run and what kind of speed are you seeing with your setup?? I have a 1991 Canadian Edition AE-21 with a Merc 2.5 liter 200, Offshore Mid section, 12" of setback with a Detwiler hyd. jackplate. Spinning a Tempest Plus 25 I'm already into the 80+ MPH range. I bought a Trophy Plus 27 that should arrive in about a week. Hoping to hit 90MPH!!
1991 Canadian Edition AE-21/Merc 2.5
1997 Checkmate Pulsare 2100/under the knife
1994 Checkmate Pulsare 2100/Merc 225Xri-SOLD
1988 Valero YT Bowrider/Merc 175-SOLD
1997 Checkmate Pulsare 2100/under the knife
1994 Checkmate Pulsare 2100/Merc 225Xri-SOLD
1988 Valero YT Bowrider/Merc 175-SOLD
-
- Regular
- Posts: 127
- Joined: May 23, 2009 3:57 pm
- Location: Jupiter, FL
Re: AE-21 CANADIAN EDITION
http://www.screamandfly.com/attachment.php?attachmentid=230041&d=1300725834
http://www.screamandfly.com/attachment.php?attachmentid=230042&d=1300725857
http://www.screamandfly.com/attachment.php?attachmentid=230042&d=1300725857
1991 Canadian Edition AE-21/Merc 2.5
1997 Checkmate Pulsare 2100/under the knife
1994 Checkmate Pulsare 2100/Merc 225Xri-SOLD
1988 Valero YT Bowrider/Merc 175-SOLD
1997 Checkmate Pulsare 2100/under the knife
1994 Checkmate Pulsare 2100/Merc 225Xri-SOLD
1988 Valero YT Bowrider/Merc 175-SOLD
-
- The new guy
- Posts: 9
- Joined: Aug 16, 2011 12:20 pm
- Location: Northern, Ontario,Canada
Re: AE-21 CANADIAN EDITION
JUPITER VALERO wrote:
Wellcome aboard Charlie. Nice looking Ae-21!! How does it run and what kind of speed are you seeing with your setup?? I have a 1991 Canadian Edition AE-21 with a Merc 2.5 liter 200, Offshore Mid section, 12" of setback with a Detwiler hyd. jackplate. Spinning a Tempest Plus 25 I'm already into the 80+ MPH range. I bought a Trophy Plus 27 that should arrive in about a week. Hoping to hit 90MPH!!
Im a real newbee here guys You are going to be my mentor. Do you raise the lift and than trim out OR do you trim out first than rasie the motor vertical Im running a Renegade 4 blade prop but I havent used a GPS yet On the old medallion speedometer I have reached 75 mph at 6,000 rpms
-
- Random Topics
- Replies
- Views
- Last post
-
- 11Replies
- 11764 Views
- Last post by RussF
Jul 08, 2011 2:49 pm
-
- 4Replies
- 16188 Views
- Last post by pnorton
Jun 28, 2011 11:55 am
-
- 10Replies
- 11489 Views
- Last post by redneckcustoms13
Jul 25, 2011 11:35 am
-
- 4Replies
- 15775 Views
- Last post by HYDROSTREAMVKING4M
Jun 26, 2011 11:01 am
-
- 1Replies
- 4049 Views
- Last post by Hippie459MN
Jun 23, 2011 7:51 am