Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
Where to find crome parts for Valero YT Bowrider
-
- The new guy
- Posts: 5
- Joined: Jun 06, 2010 8:35 am
- Contact:
Where to find crome parts for Valero YT Bowrider
My 1988 Valero YT Bowrider has been used in salt water for most of it's existance and the crome on the boat is shot and has to be replaced. I'd like to replace it with original parts if possible. I need bow and stern light bases, stanchions and end caps and finally the HydraStream logos that go on the outside sterm port and starboard.
I also need new black windshield stanchions.
Thanks,
Joe
I also need new black windshield stanchions.
Thanks,
Joe
-
- HSF Supporting Vendor
- Posts: 1989
- Joined: Mar 29, 2009 11:38 pm
- Location: montgomery MN
- Contact:
Re: Where to find crome parts for Valero YT Bowrider
The light bases should be a standard atwood or some other brand that can be bought at any dealer, I'm not sure about the end caps but I know your best bet is to have your original Hydrostream logo's recromed because there are very hard to find in any condition.
Oh ya Welcome to the forum, lets see some pictures.
Oh ya Welcome to the forum, lets see some pictures.
Samari on s&f
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
-
- The new guy
- Posts: 5
- Joined: Jun 06, 2010 8:35 am
- Contact:
Re: Where to find crome parts for Valero YT Bowrider
Thanks for the suggestions. My biggest concerns are the stanchions holding up the handrail. I'd like us the same holes and have the same stanchions. I was afraid that it would be hard to find the HydraStream crome logos. Both of my glovebox logos are in perfect condition, so I might be able to have someone make new ones. It does seem crazy because someone must have already gone through the process.
Thanks for welcome to forum. I'll put some pictures up soon. Should take it out next weekend and take some digital shots.
Thanks again,
Joe
Thanks for welcome to forum. I'll put some pictures up soon. Should take it out next weekend and take some digital shots.
Thanks again,
Joe
-
- Hydrostream know it all
- Posts: 679
- Joined: Apr 07, 2009 8:07 pm
- Location: Sterling Heights Mi.
- Contact:
Re: Where to find crome parts for Valero YT Bowrider
Let me guess, your from Michigan! What town?
Also Welcome
Also Welcome
1980 Viking
150 Black Max
150 Black Max
Re: Where to find crome parts for Valero YT Bowrider
Welcome aboard
Bow hand rails are common stainless either attwood or taco or perko
Taco supply has some nice pieces , the railing is just cut stainless tubing
I have seen a few of these where people have just filled in the holes and removed all the rails for a sleeker look
about the only thing ya can't get are the logos
we need pics
Bow hand rails are common stainless either attwood or taco or perko
Taco supply has some nice pieces , the railing is just cut stainless tubing
I have seen a few of these where people have just filled in the holes and removed all the rails for a sleeker look
about the only thing ya can't get are the logos
we need pics
<> God is Great , Beer is Good , Boaters are Crazy <>
Re: Where to find crome parts for Valero YT Bowrider
pics of mine
<> God is Great , Beer is Good , Boaters are Crazy <>
-
- The new guy
- Posts: 5
- Joined: Jun 06, 2010 8:35 am
- Contact:
Re: Where to find crome parts for Valero YT Bowrider
Thanks for suggestions. I'll search their site tonight and see what I can find. I'm going to have scan a couple of pictures in because the boat is sitting at the boat yard and I don't expect to take it out until this weekend. I regret to say the bottom was painted by the original owner. I'm going to look into having the paint removed and paint the bottom white.
Nice looking boat. You take care of it well. You're boat looks a lot like mine except for the color. Mine is red/white/blue. I had the interior done 12 years ago by a really good shop.
Thanks again for your help.
Nice looking boat. You take care of it well. You're boat looks a lot like mine except for the color. Mine is red/white/blue. I had the interior done 12 years ago by a really good shop.
Thanks again for your help.
-
- The new guy
- Posts: 5
- Joined: Jun 06, 2010 8:35 am
- Contact:
Re: Where to find crome parts for Valero YT Bowrider
I'm originally from St. Clair Shores. Will be up in Michigan in August, October and November. Still have family in McComb, Shelby and Chesterfield Twp.
-
- Random Topics
- Replies
- Views
- Last post
-
- 5Replies
- 191356 Views
- Last post by alaskastreamin
Oct 22, 2018 1:21 pm
-
- 1Replies
- 138108 Views
- Last post by blacknsilvr
Oct 20, 2018 9:47 pm
-
- 4Replies
- 167100 Views
- Last post by Hippie459MN
Nov 08, 2018 10:15 am
-
- 2Replies
- 141296 Views
- Last post by Hippie459MN
Nov 08, 2018 10:16 am
-
- 3Replies
- 89901 Views
- Last post by msethsmile+
Dec 12, 2018 10:24 am
Who is online
Users browsing this forum: No registered users and 10 guests