Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
Bilge/Well Area
-
- Getting my feet wet
- Posts: 37
- Joined: Apr 14, 2013 6:01 pm
- Location: Fort Worth
- Contact:
Re: Bilge/Well Area
The bilge area is all cleaned up and ready for some glass work
Last edited by SteveFlorioJr on May 10, 2014 11:36 pm, edited 1 time in total.
-
- Site Admin
- Posts: 3970
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 349 times
- Been thanked: 81 times
- Contact:
Re: Bilge/Well Area
You can also put more then one image in a post. Save from making a bunch of posts.
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- Getting my feet wet
- Posts: 37
- Joined: Apr 14, 2013 6:01 pm
- Location: Fort Worth
- Contact:
-
- Hydrostream Addict
- Posts: 420
- Joined: Apr 07, 2009 6:50 pm
- Location: Fairfield, CT
- Been thanked: 9 times
- Contact:
Re: Bilge/Well Area
Please tell me this is NOT what you're referring to????SteveFlorioJr wrote:The bilge area is all cleaned up and ready for some glass work
transomstand
Original owner 1975 Ventura II SE
Original owner 1975 Ventura II SE
-
- Getting my feet wet
- Posts: 37
- Joined: Apr 14, 2013 6:01 pm
- Location: Fort Worth
- Contact:
-
- Getting my feet wet
- Posts: 37
- Joined: Apr 14, 2013 6:01 pm
- Location: Fort Worth
- Contact:
Re: Bilge/Well Area
The center section looks to still be bad! But intact that is wood that I had to remove due to the soft spot on the floor. That part is tough as nails and when I tap it there is no delamination! The floor is only 1/2" plywood. Is there something that you are seeing from the pic that I am missing?
[ Post made via iPhone ]
[ Post made via iPhone ]
-
- Hydrostream Addict
- Posts: 420
- Joined: Apr 07, 2009 6:50 pm
- Location: Fairfield, CT
- Been thanked: 9 times
- Contact:
Re: Bilge/Well Area
It all looks original....it needs a core
transomstand
Original owner 1975 Ventura II SE
Original owner 1975 Ventura II SE
-
- Getting my feet wet
- Posts: 37
- Joined: Apr 14, 2013 6:01 pm
- Location: Fort Worth
- Contact:
Re: Bilge/Well Area
It is original! What do you mean core? I was going to just re-glass the bilge area and cover the foam on the left and right of the center
[ Post made via iPhone ]
[ Post made via iPhone ]
-
- Getting my feet wet
- Posts: 37
- Joined: Apr 14, 2013 6:01 pm
- Location: Fort Worth
- Contact:
-
- Hydrostream Addict
- Posts: 420
- Joined: Apr 07, 2009 6:50 pm
- Location: Fairfield, CT
- Been thanked: 9 times
- Contact:
Re: Bilge/Well Area
Uh oh....better have a look at Nosboss rebuild thread, all that destruction is removing the core. The hull is a 3 part laminate. Glass outside, balsa, then an inner layer of glass, the balsa rots away because Hydrostream didn't seal it properly, makes the boat structurally unsound.SteveFlorioJr wrote:It is original! What do you mean core? I was going to just re-glass the bilge area and cover the foam on the left and right of the center
[ Post made via iPhone ]
transomstand
Original owner 1975 Ventura II SE
Original owner 1975 Ventura II SE
-
- Random Topics
- Replies
- Views
- Last post
-
- 5Replies
- 3402 Views
- Last post by p man
Jul 04, 2011 2:40 pm
-
-
Is this a Hydrostream and if so what year and model??
Last post by Suncrest Sniper « Jul 04, 2011 4:52 pm - 5Replies
- 3021 Views
- Last post by Suncrest Sniper
Jul 05, 2011 1:11 pm
-
-
- 5Replies
- 3165 Views
- Last post by redneckcustoms13
Aug 16, 2011 9:16 am
-
- 6Replies
- 17940 Views
- Last post by Railmaniacs
Jul 27, 2021 6:47 pm
-
- 3Replies
- 6369 Views
- Last post by Hippie459MN
Jul 05, 2011 8:12 pm
Who is online
Users browsing this forum: No registered users and 109 guests