fishing hydrostream???

[aaron78viper]

anyone know if these carbs are what im looking for?? http://spacecoast.craigslist.org/boa/3337976267.html

[varmint1]

Do have a inline or a v6, if you have the inline those carbs won't work.

[ Post made via iPhone ]

[aaron78viper]

bump.. any info on the tower of power trying to make my engine a 150.. i was told locally that the only difference was a set of carbs.. anyone have more ionfo on this?? and what about nitrous? got a kit for a car i could probably mod if i had the carb plate for this motor? any info on that?

[aaron78viper]

Do have a inline or a v6, if you have the inline those carbs won't work.

[ Post made via iPhone ]

yes inline tower of power.. idk what year im looking for exactly

[varmint1]

The inlines were a blind bore block which means there is no head just a plate that covers the water ports, yes there is more to a 150 than a 115, the actual intake ports and exhaust ports in the cylinder are bigger on the 150 than the 115. Best thing is to find a bare 150 block or find a 2.0 or 2.4 liter v6 and put on it, they are easier to work on and modify

[ Post made via iPhone ]

[aaron78viper]

The inlines were a blind bore block which means there is no head just a plate that covers the water ports, yes there is more to a 150 than a 115, the actual intake ports and exhaust ports in the cylinder are bigger on the 150 than the 115. Best thing is to find a bare 150 block or find a 2.0 or 2.4 liter v6 and put on it, they are easier to work on and modify

[ Post made via iPhone ]

there is a guy online thats offering an overheated 150. the entire thing for 250. if he is close i might grab it for a rebuild. if it is bad, what are my chances of finding parts to do a fresh bore cleanup and shave the head to make sure itss straight? how much would a rebuild cost at a shop?

[varmint1]

Is it a inline? I would have to say it would cost around 1200 to 1800 for a shop to do the work and all depends on what they find

[ Post made via iPhone ]

[varmint1]

When I had my v6 bored and parts cost over 800 and I did all the disassembly and reassembly

[ Post made via iPhone ]

[aaron78viper]

ive looked and searched and looked some more.. i cannot find anything that will make more power easilyy with this motor.. if it runs like crap im gonna sell and look for a bigger newer motor. ill give anyone my taurus for a bigger running motor! mustangs are way easier to build haha maybe i need to talk to my grandpa and see what he says about it.. might be worth the convo

[Kleck]

I use my Vassarrette for musky fishing. 24v/55 thrust Motorguide moves it pretty well too. Platform and trolling motor can be removed in a minute if I want to take others along for a ride.