Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
new to fourms having a problem with my trim
-
- The new guy
- Posts: 3
- Joined: May 03, 2010 8:21 pm
- Contact:
new to fourms having a problem with my trim
hey guys i wanna start off by saying hi and you guys have helped me with a lot so far with everything.. I have a 84' viper with a small 100 merc I just got it in the water yesterday it ran great, and today I got in the boat put the trim all the way down got on it and trimmed up the boat ran great again but when i went to trim back down it did not do anything it only wants to go up. i played with wires and all but i dont think it a loose wire maybe an air lock? please help thank you guys
-
- HSF Supporting Vendor
- Posts: 1989
- Joined: Mar 29, 2009 11:38 pm
- Location: montgomery MN
- Contact:
Re: new to fourms having a problem with my trim
Welcome to the forums.
If there are two wires going into the trim pump motor, one blue and one green the one will be power and the other ground depending on witch way it was going positive to blue for up and green for down. If it's a three wire the black is ground and the blue, green are positive.
First check for power going to the motor in both directions. If there is power going up but not down it's most likely a bad solenoid.
If there are two wires going into the trim pump motor, one blue and one green the one will be power and the other ground depending on witch way it was going positive to blue for up and green for down. If it's a three wire the black is ground and the blue, green are positive.
First check for power going to the motor in both directions. If there is power going up but not down it's most likely a bad solenoid.
Samari on s&f
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
-
- Regular
- Posts: 134
- Joined: Apr 05, 2009 11:05 am
- Contact:
Re: new to fourms having a problem with my trim
I had a similar problem with my Evinrude trim.... Like 77 Viper said, the problem with mine was the solenoid. To test, I simply swapped the two solenoids. As soon as I did that, it would trim down but not trim up (the opposite as before the swap). Good luck
-
- Random Topics
- Replies
- Views
- Last post
-
- 9Replies
- 7061 Views
- Last post by beauweevle
Jul 26, 2011 12:04 pm
-
- 24Replies
- 8554 Views
- Last post by Lake Conroe Viper
Jul 27, 2011 7:24 pm
-
- 2Replies
- 4102 Views
- Last post by Andrew Vision
Oct 28, 2012 12:32 pm
-
- 3Replies
- 3131 Views
- Last post by Andyhydro
Jul 24, 2011 3:21 pm
-
- 14Replies
- 7586 Views
- Last post by silkeysak
Jul 26, 2011 6:35 pm
Who is online
Users browsing this forum: Majestic-12 [Bot] and 136 guests