Welcome to HydrostreamForums.com
If you're not registered, please consider doing so. It's easy - just click the "Register" link at the top
right corner of the page. Our forum needs members like you to contribute to the site in order to survive.
We are a community of boat lovers and Hydrostream enthusiasts here; we are happy to help anyone
who may need advice or guidance for their 'Stream; and we encourage members to offer their advice
and guidance to others as well. Thank you for visiting our forums, and please register.
We're better than Facebook.

Registering only takes a few minutes and you can do so by CLICKING HERE

If you are a member, don't forget to log in to take full advantage of the forum.

Vector weight

The place for all general Hydrostream discussions.
Post Reply
User avatar

Topic Author
STREAMFREAK
The new guy
The new guy
Posts: 13
Joined: Aug 27, 2010 12:46 pm
Contact:

Vector weight

Post by STREAMFREAK » May 13, 2013 8:58 am

I have a 79 Hydrostream Vector with original steel Hydrostream trailor has the foot step wings etc. With a big fat 75 Evinrude 200 hanging on the back. Im in the middle of a core job so there isnt a ton of soggy wet core to add weight. Im curious if someone can give me a weight on this setup. Im also curious if anyone can give me a idea on how much weight they have shedded on a core job?

User avatar

HydroV81
The new guy
The new guy
Posts: 1
Joined: Nov 07, 2017 12:55 pm
Location: Lake Mary, FL

Re: Vector weight

Post by HydroV81 » Nov 07, 2017 8:04 pm

We use to race the Vector and the Varmints back in the 80's. Weigh in for the Varmint 17'6 with 200 Merc, I believe was 1400 (gas included) ready to run. The Vector with a 235 OMC i believe was about 100 pounds lighter as it was 16' and change long. But the OMC was heavy compared to 200 2.0/2.4 Merc.

Forgive me if I am off, as that was many many years ago.

User avatar

Hippie459MN
Site Admin
Site Admin
Posts: 3470
Joined: Mar 25, 2009 7:31 pm
Location: Crown, MN
Has thanked: 67 times
Been thanked: 16 times
Contact:

Re: Vector weight

Post by Hippie459MN » Nov 08, 2017 11:02 am

Some have added weight after replacing the core simply cause it had rotted away so bad, some have shed some weight for sure as water adds weight. As for actual numbers, its hard to say cause you can put 3 Vectors next to each other and they all have different numbers and I personally have not weighed my Vector but it also is not rigged at all and the floor and is out and only the old core remains. I really need to weigh my Vulture without the motor. I know that is lighter now just cause how my "core" was replaced prior to me buying it. It was a hack job to say the least and they used standard issue plywood for the core and it was soaking wet and heavy! lol Its all been fixed now though.
-Kevin
Project Vulture | Project Vector | Project Vamp
The Vulture Wish List | Project CobraJet

1977 HydroStream Vulture - Worlds longest ongoing project. :eek:
1982 Hydrostream Vector
1982 Hydrostream Vamp
1976 CobraJet Jet Boat - Outboard conversion project
199? Glastron - aka Boat Anchor
1976 Pontoon - aka The Family Truckster

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest