Page 1 of 2
200 Merc L/U with Bobs cone
Posted: Mar 30, 2013 8:11 pm
by RussF
2001 ....200 lower unit with Bob's cone.......1:87 gears.....all new internals.......Bob's cone installed by RONNIE.....never used was a backup unit........$1400
Re: 200 Merc L/U with Bobs cone
Posted: Mar 30, 2013 8:17 pm
by RussF
Re: 200 Merc L/U with Bobs cone
Posted: Mar 30, 2013 8:19 pm
by RussF
Re: 200 Merc L/U with Bobs cone
Posted: Mar 30, 2013 8:19 pm
by RussF
Re: 200 Merc L/U with Bobs cone
Posted: Mar 30, 2013 8:20 pm
by RussF
Re: 200 Merc L/U with Bobs cone
Posted: Mar 30, 2013 8:21 pm
by RussF
Re: 200 Merc L/U with Bobs cone
Posted: Mar 30, 2013 10:59 pm
by Hippie459MN
Boy, RONNIE sure does amazing work! If I cant find anyone local to me to do the new cone on mine, I will be shipping mine to him for sure.
Whoever buys this will have an awesome LU! Ronnies work is second to none!
Re: 200 Merc L/U with Bobs cone
Posted: Apr 01, 2013 10:21 pm
by 265mercman
whats the best for filler i gota redo mine this week bondo cracks out any suggestions
[ Post made via iPhone ]
Re: 200 Merc L/U with Bobs cone
Posted: Apr 02, 2013 6:35 pm
by Sonik
I've used duraglass for quite a while with good results. I follow the finish sand with a high build primer and one final fine grit sanding, followed by your top coat of choice and have gotten good results.
Re: 200 Merc L/U with Bobs cone
Posted: Apr 02, 2013 9:36 pm
by YDOC462
Sonik wrote:I've used duraglass for quite a while with good results. I follow the finish sand with a high build primer and one final fine grit sanding, followed by your top coat of choice and have gotten good results.
x 2!!
I used everglass made by evercoat. same as duraglass.
[ Post made via Android ]