Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
Well, got the hull ready for glass, mixed up some resin and 1/4 inch chopped strand to make a good radius in the pad area. Gunna start under the deck with some 1808 in the morning. Talk about a tight space to work
A70D3E52-432A-40D1-87D4-C665DA4E0BB1.jpeg (430.99 KiB) Viewed 99698 times
3EBD12EE-84D7-44EA-9FC2-75BB58BF63CB.jpeg (374.49 KiB) Viewed 99698 times
422E6694-677D-4213-8F2A-6BDEC7D61267.jpeg (422.1 KiB) Viewed 99698 times
A14F51FC-56B6-4489-B1DA-4E284E7A4D5C.jpeg (444.6 KiB) Viewed 99693 times
BronsonC wrote: ↑Apr 23, 2022 7:20 pm
Well, got the hull ready for glass, mixed up some resin and 1/4 inch chopped strand to make a good radius in the pad area. Gunna start under the deck with some 1808 in the morning. Talk about a tight space to workA70D3E52-432A-40D1-87D4-C665DA4E0BB1.jpeg3EBD12EE-84D7-44EA-9FC2-75BB58BF63CB.jpeg422E6694-677D-4213-8F2A-6BDEC7D61267.jpeg
Didnt get a whole lot done lately, almost done laying 1808 threw out the hull. Did manage find me a windshield had to drive to Mississippi and it came with a boat!
D3E23CB0-5D63-4CC1-855F-EEF66858011E.jpeg (624.35 KiB) Viewed 98526 times
F383F4C7-D338-42F8-ABCF-380251627D83.jpeg (726.22 KiB) Viewed 98526 times
Back working on the vector, started with core on the wings and going to move to the pad next. I have some spots i need to patch that i sanded out because they looked a lil dry but i think once i patch them the core will bond nicely to the hull. Only problem im seeing so far is that theres a hook on the second set of lifting strakes from the pad, i think from sitting on a crappy trailer with short bunks and rotten core for so long. Looks to be around 3/16 or so deep starting from the back of the boat to about 3ft forward. Core gets layed over that set of strakes so im hoping i can put enough wait on it to get the boat to sit flat on the jig in those areas
85E0DC5E-073C-4C2B-81EB-1719457A61BD.jpeg (654.33 KiB) Viewed 97866 times
BDA9F32C-5A8F-422F-934B-EE6665154048.jpeg (587.27 KiB) Viewed 97866 times