Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
87 Vector project
87 Vector project
I'm in the process of fully going through a 87 vector which is my first Hydrostream. I've completed the core with 1/2 balsa from transom to the tip of the bow. Replaced transom with Seacast. Finally cut and layied in the floor out of 3/4" marine ply. And while looking through vector projects I see that the floor in my vector seems a lot slimmer then most vector, That seem way wider than mine. Can any body inform me why this is??? Thanks
[ Post made via iPhone ]
[ Post made via iPhone ]
-
- Site Admin
- Posts: 3970
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 349 times
- Been thanked: 81 times
- Contact:
Re: 87 Vector project
Welcome to the forum.
Looks good... But that seacast... I personally would not use that stuff, especially on a performance hull like a Hydrostream. Thats just me though. Honestly, I think you are the first person I have heard of use that stuff on a hydrostream/performance hull.
Looks good... But that seacast... I personally would not use that stuff, especially on a performance hull like a Hydrostream. Thats just me though. Honestly, I think you are the first person I have heard of use that stuff on a hydrostream/performance hull.
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- Site Admin
- Posts: 3970
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 349 times
- Been thanked: 81 times
- Contact:
Re: 87 Vector project
Was looking at your pictures again, did you put core down the pad and on the outside of your stringers? Also, I hope them stringers are marine grade wood.
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Re: 87 Vector project
Yea just don't have a pic of it. It's on top of the pad and on the out side of the stringers. What's your thoughts on the Seacast? I was turned on to it by a few friend using in for there transom also I'm hydrostreams.
[ Post made via iPhone ]
[ Post made via iPhone ]
-
- Site Admin
- Posts: 3970
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 349 times
- Been thanked: 81 times
- Contact:
Re: 87 Vector project
From what I have seen, Seacast is for low powered non-performance boats. Not ones made to run 80+ mph. Also I have always seen it used as a means to band-aid a repair. I have never personally used the stuff, nor will I ever in a performance boat, and I have never seen one person recommend it in a performance application, ever. Replace it with wood, or composite (coosa board). I have seen 100's of performance boat restos and not one of them has used the stuff that I have seen. Now, I'm not saying it wont work cause I have never used the stuff, but I also wont put my trust in it at 80+ mph.
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- Site Admin
- Posts: 3970
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 349 times
- Been thanked: 81 times
- Contact:
Re: 87 Vector project
Im sure some other will chime in that might have more experience than me with this stuff.
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- Random Topics
- Replies
- Views
- Last post
-
- 13Replies
- 8980 Views
- Last post by AdamDK
Sep 03, 2017 7:26 pm
-
- 8Replies
- 7177 Views
- Last post by bottomofdaboot69
Mar 09, 2018 7:06 pm
-
- 3Replies
- 3143 Views
- Last post by AdamDK
Aug 13, 2017 6:36 pm
-
- 7Replies
- 11491 Views
- Last post by HST4ME
Nov 08, 2017 5:40 pm
-
- 4Replies
- 4421 Views
- Last post by Valero 86
Aug 25, 2017 9:25 pm
Who is online
Users browsing this forum: No registered users and 22 guests