This promises to be a long, slow process, as it will be back-burnered for the short term as I need to refinish the family's antique inboard runabout first (1936 Hacker-design twin cockpit 19-footer). But, that won't keep me from occasionally tearing out an occasional piece of rotted wood, perusing eBay for bits and pieces, stockpiling epoxy by the gallon, and, maybe even just sitting in it and making motor noises.
Here are some pics of it the day we picked it up a couple weeks ago.
Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
1977 Hydrostream Ventura II Rebuild & Restore
-
- The new guy
- Posts: 8
- Joined: Aug 29, 2014 11:58 am
- Location: 1000 Islands
- Contact:
1977 Hydrostream Ventura II Rebuild & Restore
- Attachments
-
- She floats - that's a start!
- IMG_1897.JPG (799.11 KiB) Viewed 4459 times
-
- Pick up day, floating it off the seller's trailer onto mine.
- IMG_1894.JPG (954.91 KiB) Viewed 4459 times
-
- The new guy
- Posts: 8
- Joined: Aug 29, 2014 11:58 am
- Location: 1000 Islands
- Contact:
Re: 1977 Hydrostream Ventura II Rebuild & Restore
This will be the motive power - a modern-ish motor (by my standards) in vintage clothing, as the most of the guts will be from the 1980s, a mix of 140 bubble back bits, capped by a 1976 cowling.
- Attachments
-
- Johnson135_1928.jpg (685.98 KiB) Viewed 4458 times
-
- A true Johnrude, end result will be a crossflow 140.
- Johnson135_1927.jpg (687.31 KiB) Viewed 4458 times
Last edited by Chinewalker on Sep 08, 2014 3:15 pm, edited 1 time in total.
-
- The new guy
- Posts: 8
- Joined: Aug 29, 2014 11:58 am
- Location: 1000 Islands
- Contact:
Re: 1977 Hydrostream Ventura II Rebuild & Restore
I dug into it a bit last weekend, removing the homemade benches and the buckets, plus the rear carpeting. Revealed about what I expected - soggy, rotted plywood in place of balsa core, a scabbed on transom repair, and one neatly drilled hole right through the bottom.
- Attachments
-
- Mush.
- HSVII_4591.jpg (654.67 KiB) Viewed 4458 times
-
- No surprises - about what I expected.
- HSVII_4590.jpg (579.93 KiB) Viewed 4458 times
-
- Looking empty.
- HSVII_4592.jpg (875.37 KiB) Viewed 4458 times
-
- Transom booger!
- HSVII_4593.jpg (814.91 KiB) Viewed 4458 times
-
- Hydrostream Addict
- Posts: 420
- Joined: Apr 07, 2009 6:50 pm
- Location: Fairfield, CT
- Been thanked: 9 times
- Contact:
Re: 1977 Hydrostream Ventura II Rebuild & Restore
Some lovely workmanship there
It occurs to me you'll have to change your name. Venturas don't really chine walk. Other Stream drivers are always pissed at me because they claim I'm just sitting there holding the wheel, while they are working their *** off driving
It occurs to me you'll have to change your name. Venturas don't really chine walk. Other Stream drivers are always pissed at me because they claim I'm just sitting there holding the wheel, while they are working their *** off driving
transomstand
Original owner 1975 Ventura II SE
Original owner 1975 Ventura II SE
-
- The new guy
- Posts: 8
- Joined: Aug 29, 2014 11:58 am
- Location: 1000 Islands
- Contact:
Re: 1977 Hydrostream Ventura II Rebuild & Restore
Actually, that "workmanship" might save me some work in the long run as I've seen some posts about spending days removing stubborn balsa coring. The plywood bits are pulling out in large chunks and aren't really attached to much of anything at all.transomstand wrote:Some lovely workmanship there
It occurs to me you'll have to change your name. Venturas don't really chine walk. Other Stream drivers are always pissed at me because they claim I'm just sitting there holding the wheel, while they are working their *** off driving
As for the handle - I've had that since the 1990s when I was racing Stock Outboard.
-
- Random Topics
- Replies
- Views
- Last post
-
- 1Replies
- 116810 Views
- Last post by mickey12
May 20, 2022 1:33 pm
-
- 2Replies
- 123026 Views
- Last post by Hydrostream Bot
May 22, 2022 8:09 am
-
- 2Replies
- 76374 Views
- Last post by Hydrostream Bot
May 22, 2022 8:22 am
-
- 1Replies
- 46897 Views
- Last post by blowitup
May 28, 2022 10:58 pm
-
- 1Replies
- 39527 Views
- Last post by Mikem
Jun 03, 2022 7:47 am
Who is online
Users browsing this forum: No registered users and 84 guests