Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
1984 hydrostream vector tearing down
-
- Getting my feet wet
- Posts: 21
- Joined: May 01, 2014 5:52 pm
- Location: florida
- Contact:
Re: 1984 hydrostream vector tearing down
I seen something about a hook in pad should this boat have a hook in the pad??
[ Post made via Android ]
[ Post made via Android ]
-
- HSF Lifetime Supporter
- Posts: 901
- Joined: Apr 11, 2010 12:57 pm
- Location: beaumont, tx
- Has thanked: 23 times
- Been thanked: 5 times
- Contact:
Re: 1984 hydrostream vector tearing down
hook......wedge.....whatever its called.......YES
put a 6' level on pad......you should see light about 24-36" from end of pad
put a 6' level on pad......you should see light about 24-36" from end of pad
81 vector....complete restore....1991 7 pedal 200 slightly modded
ALWAYS under construction
HYDROSTREAM HELLIONS
https://www.youtube.com/watch?v=YHE8wWZsFpw
ALWAYS under construction
HYDROSTREAM HELLIONS
https://www.youtube.com/watch?v=YHE8wWZsFpw
-
- Getting my feet wet
- Posts: 21
- Joined: May 01, 2014 5:52 pm
- Location: florida
- Contact:
Re: 1984 hydrostream vector tearing down
Ok cause I can look down it at bottom from back and see in just eyeballing it I'm guessing I would see 1/4 inch of daylight
[ Post made via iPhone ]
[ Post made via iPhone ]
-
- Getting my feet wet
- Posts: 21
- Joined: May 01, 2014 5:52 pm
- Location: florida
- Contact:
Re: 1984 hydrostream vector tearing down
Another question when I start taking all the core out, the boat is sitting on that trailer well how much more support does it need to hold it's right shape will it warp up or will the boat pretty much hold it's self
[ Post made via iPhone ]
[ Post made via iPhone ]
-
- Hydrostream Addict
- Posts: 420
- Joined: Apr 07, 2009 6:50 pm
- Location: Fairfield, CT
- Been thanked: 9 times
- Contact:
Re: 1984 hydrostream vector tearing down
Should be supported as well as you possibly can. Best looking jig I ever saw on this threadcottontop58 wrote:Another question when I start taking all the core out, the boat is sitting on that trailer well how much more support does it need to hold it's right shape will it warp up or will the boat pretty much hold it's self
[ Post made via iPhone ]
http://www.hydrostreamforums.com/viewtopic.php?f=13&t=2090&hilit=viper+jig
transomstand
Original owner 1975 Ventura II SE
Original owner 1975 Ventura II SE
-
- Getting my feet wet
- Posts: 21
- Joined: May 01, 2014 5:52 pm
- Location: florida
- Contact:
Re: 1984 hydrostream vector tearing down
havent did much work on the boat but got out there and just cut on it a little more, havent built a jig or put anymore supports on my trailer, so i havent cut much, and trying to be carefull cause kinda confused where the core balsa stops and starts here is a picture of where i think i opened up the pad box and dug into the pad, the is the bottom skin there right?
- Attachments
-
- pad box.jpg (618.41 KiB) Viewed 4870 times
-
- Regular
- Posts: 174
- Joined: Jun 03, 2012 8:29 pm
- Location: MA
- Been thanked: 6 times
- Contact:
Re: 1984 hydrostream vector tearing down
You're doing a great job so far, keep on going carefully and you should do just fine! looks like you found the core area in the pad too. Keep it up
-
- Getting my feet wet
- Posts: 21
- Joined: May 01, 2014 5:52 pm
- Location: florida
- Contact:
Re: 1984 hydrostream vector tearing down
Just curious but once I do get to the point of laying core , is there something better than balsa and other question is one the balsa is layed would it be better to get it shot over with a chopper gun I know someone who builds boats that's could do it , just wanting the best sealed off way when I get to that point
[ Post made via iPhone ]
[ Post made via iPhone ]
-
- Regular
- Posts: 174
- Joined: Jun 03, 2012 8:29 pm
- Location: MA
- Been thanked: 6 times
- Contact:
Re: 1984 hydrostream vector tearing down
From what I have been reading, balsa is a great core for a boat. I would say make sure you soak some resin in the balsa before you lay it in the hull, and make sure there is enough resin to make a bond if it soaks up a little more. on top, I did mine with a layer of 17 oz and used a paint brush to spread out the resin for the most part. then rolled it out with a glass roller. Once I get more stuff its on to the stringers. If you are worried about it being sealed up, make sure you are using enough resin. the top side will definitely soak it up. Gel coat will help seal it up better also when you go to finish it up
-
- Random Topics
- Replies
- Views
- Last post
-
- 3Replies
- 6384 Views
- Last post by AdamDK
May 05, 2019 7:08 am
-
- 6Replies
- 12961 Views
- Last post by tnelson77
May 19, 2019 1:41 pm
-
- 11Replies
- 20585 Views
- Last post by rjdubiel
Aug 21, 2019 10:54 pm
-
- 3Replies
- 9297 Views
- Last post by JDChase
Oct 30, 2019 8:45 pm
-
- 2Replies
- 7977 Views
- Last post by rjdubiel
May 11, 2019 6:19 am
Who is online
Users browsing this forum: No registered users and 52 guests