Wondering how to post images or maybe change your avatar or maybe something else?
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
You can find that and a lot of other useful tips for using the forums in the HydrostreamForums Knowledge Base.
To visit the HydrostreamForums Knowledge Base CLICK HERE
AE-21 Rigging
Re: AE-21 Rigging
Airex Coring knees glassed in with 2 layers of 1708 Biax on each side and 24oz S glass bonding ...
-
- Regular
- Posts: 127
- Joined: May 23, 2009 3:57 pm
- Location: Jupiter, FL
- Contact:
Re: AE-21 Rigging
Here's a dockside video of my AE-21 hitting the water for it's maiden voyage. This is the first time the boat has been wet in 6 years!!:
http://www.dailymotion.com/user/TUBESLIDER/1
http://www.dailymotion.com/user/TUBESLIDER/1
1991 Canadian Edition AE-21/Merc 2.5
1997 Checkmate Pulsare 2100/under the knife
1994 Checkmate Pulsare 2100/Merc 225Xri-SOLD
1988 Valero YT Bowrider/Merc 175-SOLD
1997 Checkmate Pulsare 2100/under the knife
1994 Checkmate Pulsare 2100/Merc 225Xri-SOLD
1988 Valero YT Bowrider/Merc 175-SOLD
-
- Site Admin
- Posts: 3970
- Joined: Mar 25, 2009 7:31 pm
- Location: Nowthen, MN
- Has thanked: 349 times
- Been thanked: 81 times
- Contact:
Re: AE-21 Rigging
Looks good but where is the video of you doing 100mph?
-Kevin
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
Project Vulture | Project Vector | Project Vamp | Project Vixen
The Vulture Wish List | Project CobraJet
1977 HydroStream Vulture - Worlds longest ongoing project.
1982 Hydrostream Vector
1982 Hydrostream Vamp
1973 Hydrostream Vixen
1976 CobraJet Jet Boat - Outboard conversion project
1976 Pontoon - aka The Family Truckster
-
- HSF Supporting Vendor
- Posts: 1989
- Joined: Mar 29, 2009 11:38 pm
- Location: montgomery MN
- Contact:
Re: AE-21 Rigging
Oh how I miss that sound! I sure hope the ice drops soon or else I'm bringing my boat south until I hit open water.
I rely like the colors, kind of odd combination but it just works so well with that hull.
I rely like the colors, kind of odd combination but it just works so well with that hull.
Samari on s&f
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
Chet Olson
75 viper 2.4 200, 130 shot of NOS
91 vegas loaned out
79 vking project 2.5 280
-
- Regular
- Posts: 127
- Joined: May 23, 2009 3:57 pm
- Location: Jupiter, FL
- Contact:
Re: AE-21 Rigging
1991 Canadian Edition AE-21/Merc 2.5
1997 Checkmate Pulsare 2100/under the knife
1994 Checkmate Pulsare 2100/Merc 225Xri-SOLD
1988 Valero YT Bowrider/Merc 175-SOLD
1997 Checkmate Pulsare 2100/under the knife
1994 Checkmate Pulsare 2100/Merc 225Xri-SOLD
1988 Valero YT Bowrider/Merc 175-SOLD
-
- Regular
- Posts: 127
- Joined: May 23, 2009 3:57 pm
- Location: Jupiter, FL
- Contact:
Re: AE-21 Rigging
Here's a little cell phone video of my AE-21 shot from my friends Hydrostream Virage:
http://www.youtube.com/watch?v=gC6aihCAIZQ
http://www.youtube.com/watch?v=gC6aihCAIZQ
1991 Canadian Edition AE-21/Merc 2.5
1997 Checkmate Pulsare 2100/under the knife
1994 Checkmate Pulsare 2100/Merc 225Xri-SOLD
1988 Valero YT Bowrider/Merc 175-SOLD
1997 Checkmate Pulsare 2100/under the knife
1994 Checkmate Pulsare 2100/Merc 225Xri-SOLD
1988 Valero YT Bowrider/Merc 175-SOLD
-
- Regular
- Posts: 127
- Joined: May 23, 2009 3:57 pm
- Location: Jupiter, FL
- Contact:
Re: AE-21 Rigging
OK..here's a teaser for you....full tank of gas (about 20+ gallons), two adults (305lbs), cooler, anchor, and gear........
and a stock 200HP 2.5 fishing motor................................................................................................
79.9MPH GPS turning a Tempest Plus 25 over 6500rpm ! I ran out of prop ...the boat definitly needs a 28 Chopper..I'm sure I would've run mid 80's by myself, there was more in the motor but I did not want to pop anything...I've got U-Flex Silversteer hyd. steering on order and a couple of different props to try..I think 90+ will be a breeze (no pun intended!!! )
and a stock 200HP 2.5 fishing motor................................................................................................
79.9MPH GPS turning a Tempest Plus 25 over 6500rpm ! I ran out of prop ...the boat definitly needs a 28 Chopper..I'm sure I would've run mid 80's by myself, there was more in the motor but I did not want to pop anything...I've got U-Flex Silversteer hyd. steering on order and a couple of different props to try..I think 90+ will be a breeze (no pun intended!!! )
1991 Canadian Edition AE-21/Merc 2.5
1997 Checkmate Pulsare 2100/under the knife
1994 Checkmate Pulsare 2100/Merc 225Xri-SOLD
1988 Valero YT Bowrider/Merc 175-SOLD
1997 Checkmate Pulsare 2100/under the knife
1994 Checkmate Pulsare 2100/Merc 225Xri-SOLD
1988 Valero YT Bowrider/Merc 175-SOLD
-
- Random Topics
- Replies
- Views
- Last post
-
- 8Replies
- 3588 Views
- Last post by Rut311969
Feb 17, 2012 5:14 am
-
- 3Replies
- 2578 Views
- Last post by VultureNo2
Feb 16, 2012 8:54 pm
-
- 4Replies
- 3716 Views
- Last post by alaskastreamin
Feb 17, 2012 7:22 pm
-
- 16Replies
- 6613 Views
- Last post by VultureNo2
Feb 21, 2012 5:18 pm
-
- 4Replies
- 4569 Views
- Last post by smiles
Mar 08, 2012 10:53 am
Who is online
Users browsing this forum: No registered users and 50 guests