ok so i got it ready for water just know splash well yet and got to do some odd and inns as for painting and stuff like that goes iam going to start sanding on it here and there i got a guy that wants to do a vinyl wrap on it wants some motor work done on his boat for exchange so i think iam going to try it i got to repaint so if it dont come out good ill just repaint it like i got too anyways but for some pictures and progress here we go ladies and gents and a big thanks to hippie rick bill and chet for all the know hows and learning progress and to everyone else that chimed in along the way thanks
tearing out the core hard work harder grinding though
transom in and made some copyies of others stringers too tie in too the transom
starting to lay down the core and getting started on going back together
fixed my hole i cut while getting the transom out
so i made some 1/2 all thread that went from the bottom jack plate holes that came up and bolted up to were my splash well was for extra transom support and started on the floor
and the motor back on the floor has some gaps around it but going to put carpet in and coated the wood with resin then going to put cool seal on top of that before carpet to seal it really good
and the way it used to look like which it still does just needs repainted now
ok so i got it ready for water just know splash well yet and got to do some odd and inns as for painting and stuff like that goes iam going to start sanding on it here and there i got a guy that wants to do a vinyl wrap on it wants some motor work done on his boat for exchange so i think iam going to try it i got to repaint so if it dont come out good ill just repaint it like i got too anyways but for some pictures and progress here we go ladies and gents and a big thanks to hippie rick bill and chet for all the know hows and learning progress and to everyone else that chimed in along the way thanks
[img]http://i29.tinypic.com/2ppg9kx.jpg[/img]
tearing out the core hard work harder grinding though
[img]http://i29.tinypic.com/3150qr5.jpg[/img]
transom in and made some copyies of others stringers too tie in too the transom
[img]http://i28.tinypic.com/5yrb0w.jpg[/img]
starting to lay down the core and getting started on going back together
[img]http://i26.tinypic.com/10zwygm.jpg[/img]
fixed my hole i cut while getting the transom out
[img]http://i28.tinypic.com/2udw8dx.jpg[/img]
so i made some 1/2 all thread that went from the bottom jack plate holes that came up and bolted up to were my splash well was for extra transom support and started on the floor
[img]http://i31.tinypic.com/zu5ogh.jpg[/img]
and the motor back on the floor has some gaps around it but going to put carpet in and coated the wood with resin then going to put cool seal on top of that before carpet to seal it really good
[img]http://i27.tinypic.com/2ajrosm.jpg[/img]
and the way it used to look like which it still does just needs repainted now