placed an order with em yesterday.....great people :up:

[quote="Hippie459MN"]
Plus they like us guys here. Tell em you head from them here. They will take awesome care of ya and answer any question you might have.[/quote]

:agree:

I'll be talking to them this week also. Bill

[quote="aaron78viper"]I find expresscomposites.com very usefull for planning my rebuild. lots of stuff to choose from there[/quote]
Plus they like us guys here. Tell em you head from them here. They will take awesome care of ya and answer any question you might have.

[quote="STREAMFREAK"]Ok so Ive started my recore process and am starting to get some questions not yet answered from the countless hours reading the forums and everyones recore posts. I started pulling the interior over the weekend and cut a section of the floor last night to find a soaked core like a sponge and not even stuck to the outer skin. Im thinking once Ive got the process down of cutting it might be a easy removal but laws of average say probably not. So I see my core starts at the glass stringers and go out about 2 feet ??? Then Ive also seen some that have said core is also up into the outer wings under the air boxes on the sides ? Im planning on cutting the boxes out but originally hadnt planned on putting them back in as Ide like the extra room. So if I cut them out is that gonna effect the strength ? Or maybe cut them half way as a storage box or the other option was to put a stringer of sorts along where the outside of the box should go ? My other big question is that Im not planning on replacing the carpet but am looking for other options for floor covering. Im thinking floor paint ? Ive heard of some using bed liner but the ide of black floor doesnt appeal to me or the heat of summer burning my feet. Any ideas here ? Im on a budget but plan on doing it correctly.[/quote]

I have had similar thoughts as you for the foam float boxes. i cut mine out of my viper that i am working on, and i plan on putting small stingers on the outer edges to replace any strength lost, however i am using it for strage also. for floor covering, i hear a lot about awl-grip. you can gelcoat the floor with the non skid additive (awl-grip) this might be my plan as well. I find expresscomposites.com very usefull for planning my rebuild. lots of stuff to choose from there

Ok so Ive started my recore process and am starting to get some questions not yet answered from the countless hours reading the forums and everyones recore posts. I started pulling the interior over the weekend and cut a section of the floor last night to find a soaked core like a sponge and not even stuck to the outer skin. Im thinking once Ive got the process down of cutting it might be a easy removal but laws of average say probably not. So I see my core starts at the glass stringers and go out about 2 feet ??? Then Ive also seen some that have said core is also up into the outer wings under the air boxes on the sides ? Im planning on cutting the boxes out but originally hadnt planned on putting them back in as Ide like the extra room. So if I cut them out is that gonna effect the strength ? Or maybe cut them half way as a storage box or the other option was to put a stringer of sorts along where the outside of the box should go ? My other big question is that Im not planning on replacing the carpet but am looking for other options for floor covering. Im thinking floor paint ? Ive heard of some using bed liner but the ide of black floor doesnt appeal to me or the heat of summer burning my feet. Any ideas here ? Im on a budget but plan on doing it correctly.